Bussmann
Bussmann HM60060-1CR Fuse Block 60A 600V 1 Pole
A 60 A, 600 V single-pole fuse block accepting 35–60 A Class H fuses, with box-lug terminals for 14–2 AWG wire and bolt-down or DIN-rail mounting
- TypeCircuit Breakers
- Handles up to 60 A continuous current for reliable circuit protection
- Rated for 600 VAC to suit industrial and generator applications
- Accepts wire sizes 14 to 2 AWG via box-lug connectors for flexible wiring
- Single-pole open design mounts on bolt-down or DIN rail for easy installation
- UL Listed, CSA Certified, CE, RoHS and REACH compliant for safety assurance
Fuse Block 60 A 600 V 1 Pole
The Bussmann HM60060-1CR is a single-pole fuse block rated for 60 amps at 600 volts AC. It accepts UL Class H fuses in the 35 to 60 amp range and is built with a thermoplastic body for industrial electrical panels. The open design allows visual inspection of the fuse link during maintenance checks.
Suited for 600 V industrial control circuits
This block suits panel builders wiring 600 VAC machinery feeds, motor starters or lighting contactors that require bolt-down or DIN-rail mounting. It is not for DC circuits because the holder carries no DC voltage rating. Buyers needing multiple poles or a higher interrupting class should look at a different series.
Box lug accepts 14 to 2 AWG copper
The single specification that decides fit is the box-lug connector rated for 14 to 2 AWG conductors. If the installation uses larger cable or requires a different terminal style, this block will not terminate the wires securely.
Highlights
- Handles up to 60 A continuous current for reliable circuit protection
- Rated for 600 VAC to suit industrial and generator applications
- Accepts wire sizes 14 to 2 AWG via box-lug connectors for flexible wiring
- Single-pole open design mounts on bolt-down or DIN rail for easy installation
- UL Listed, CSA Certified, CE, RoHS and REACH compliant for safety assurance
Specifications
| Type | Circuit Breakers |
|---|
Questions about this item
How do I confirm the fuse block is seated and conducting properly after mounting?
After bolting or DIN-rail mounting the block, verify the fuse is fully inserted into the open design, tighten the box-lug connectors on 14 to 2 AWG wire, then measure continuity across the single pole with a multimeter to confirm a solid circuit.
What ships with the HM60060-1CR and what must I supply separately?
The unit includes the 1-pole thermoplastic fuse block rated 60 A / 600 VAC; you must supply UL Class H fuses in the 35 to 60 A range and 14 to 2 AWG wire for the box-lug terminals.
Which version of this fuse block matches a 60 A, 600 VAC, single-pole DIN-rail or bolt-down installation?
The HM60060-1CR is the 1-pole model rated 60 A at 600 VAC, open design, with bolt-down/DIN-rail mounting and box-lug terminals for 14 to 2 AWG — select this version when those exact ratings fit your circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
