Bussmann
Bussmann GDC-125MA Glass Fuse 125mA 250V AC 35A 5 PK
A time-delay glass fuse rated 125 mA at 250 V AC with a 35 A interrupt rating, supplied in a pack of five
- Time-delay action prevents nuisance blows
- 35 A interrupt rating handles fault currents safely
- 125 mA rating protects sensitive low-current circuits
- 250 V AC rating suits mains-voltage equipment
- Pack of five gives ready spares for maintenance
What this fuse pack provides
This pack contains five GDC-series glass cartridge fuses rated 125 mA at 250 V AC. Each fuse has a time-delay characteristic and a 35 A interrupt rating at the rated voltage. They are intended for low-current circuit protection in equipment that specifies this fuse type.
Verify the holder and rating before fitting
Confirm that your fuse holder accepts a 20 mm by 5 mm cylindrical glass body with non-rejection contacts. Check that the circuit requires a 125 mA time-delay fuse and that the available fault current does not exceed the 35 A interrupt rating. Cross-reference the equipment service documentation for the correct series designation.
Behaviour under sustained overload
The time-delay element tolerates brief inrush currents without opening, but will clear a sustained over-current condition. Because the interrupt rating is 35 A at 250 V AC, the fuse is not suitable for circuits where prospective short-circuit current could exceed that value. Continuous operation at rated current remains within design limits.
Highlights
- Time-delay action prevents nuisance blows
- 35 A interrupt rating handles fault currents safely
- 125 mA rating protects sensitive low-current circuits
- 250 V AC rating suits mains-voltage equipment
- Pack of five gives ready spares for maintenance
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
What comes in the 5-pack and do I need a separate fuse holder?
The pack contains five GDC-125MA glass fuses rated 125 mA at 250 V AC with a 35 A interrupt rating. A compatible fuse block such as the HTB series is required and sold separately.
How do I choose between the equivalent series like 218, GDC, GDG and S506?
All listed series — 218, GDC, GDG and S506 — share the same 20 mm × 5 mm cylindrical glass body, 125 mA rating and 35 A interrupt rating at 250 V AC; pick the series your existing holder or bill of materials specifies.
What does the 35 A interrupt rating mean when the fuse is installed in my equipment?
It means the fuse can safely break a fault current up to 35 A at 250 V AC without rupturing, protecting the circuit while the 125 mA element handles normal overloads with time-delay action.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
