Bussmann
Bussmann AGX-1/10 Glass Fuse 1/10A 10kA 125V 35A 250V 5 PK
Pack of five fast-acting glass fuses rated 1/10 A with 10 kA interrupt at 125 V AC and 35 A at 250 V AC
- Fast-acting protection clears faults quickly
- 10 kA interrupt rating at 125 V AC handles high fault currents
- 35 A interrupt rating at 250 V AC suits higher voltage circuits
- Glass cylindrical body allows visual inspection of element
- Compatible with standard fuse blocks including series 3823 and 8000
EATON BUSSMANN AGX Glass Fuse
This pack contains five fast-acting glass fuses rated at 1/10 A for 250 V AC circuits. They suit technicians and hobbyists protecting low-current control boards, instrumentation or lighting gear where a cylindrical rejection-style fuse is required. The AGX series fits standard fuse blocks such as the 3823, HFA, HHN, HK, HKP, HPF, HRK, HTB and S-8000 families. Buyers needing higher amperage ratings or a different body style should look elsewhere.
Capacity and headroom
Each fuse carries a continuous load of 1/10 A and interrupts up to 10 kA at 125 V AC or 35 A at 250 V AC. That interrupt rating covers typical branch-circuit fault levels in residential and light-commercial panels. The single-element design opens quickly on overcurrent, but the 1/10 A rating leaves no headroom for sustained loads above that value; circuits drawing more current will nuisance-blow.
Thermals, noise and power draw
Glass-body construction dissipates heat through the body and end caps during normal operation. No moving parts mean silent performance. Power loss at rated current is low, so the fuse runs cool under typical loads. The fast-acting element melts rapidly during a fault, limiting let-through energy without generating audible noise.
Highlights
- Fast-acting protection clears faults quickly
- 10 kA interrupt rating at 125 V AC handles high fault currents
- 35 A interrupt rating at 250 V AC suits higher voltage circuits
- Glass cylindrical body allows visual inspection of element
- Compatible with standard fuse blocks including series 3823 and 8000
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
Will this 1/10A glass fuse work in my existing 3823 series fuse block?
Yes, the fuse is listed as compatible with the 3823 fuse block series, along with HFA, HHN, HK, HKP, HPF, HRK, HTB and S-8000 series blocks.
How can I confirm the fuse is intact after installing it?
Check continuity with a multimeter; a good fast-acting fuse will show a closed circuit, while a blown element will read open.
Does the 5-pack include any fuse holders or blocks?
No, the package contains only five AGX series glass fuses; compatible fuse blocks such as the 3823 or HFA series must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
