We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Burndy

Burndy YAD28M12E12 uninsulated compression terminal 4/0 AWG 1/2 in stud

SKU CH-1EHQ-SFC7P

Uninsulated copper compression terminal for 4/0 AWG wire with a 1/2 in stud hole, tin-plated, brazed barrel, rated 600 V and 302 °F, UL 467 listed

  • TypeElectrical Connectors
  • 4/0 AWG crimp connection for heavy-gauge power cables
  • Tin-plated copper barrel resists corrosion in harsh environments
  • Brazed long barrel adds mechanical strength under vibration
  • UL 467 listed for grounding and bonding applications
  • Rated 600 V and 302 °F for demanding electrical systems

Terminal for 4/0 AWG cable

The Burndy YAD28M12E12 is an uninsulated compression terminal designed for 4/0 AWG copper conductors. It accepts a 1/2 inch stud and provides a tin-plated copper connection rated for 600 V. The brazed barrel construction ensures mechanical strength in demanding electrical and industrial wiring applications.

Replaces damaged or undersized lugs

This terminal replaces worn, corroded or incorrectly sized ring terminals on heavy-gauge cables. The jump is worth it when the existing lug shows heat damage, loose strands or a stud mismatch that cannot be resolved with a washer. UL 467 listing confirms compliance for grounding and bonding installations.

Verify stud size and crimp tooling

Confirm the mounting hardware uses a 1/2 inch stud before ordering. Ensure your crimp tool and die set are approved for 4/0 AWG long-barrel brazed terminals with a .89 in outside diameter. The bare copper finish requires antioxidant compound in corrosive environments.

Highlights

  • 4/0 AWG crimp connection for heavy-gauge power cables
  • Tin-plated copper barrel resists corrosion in harsh environments
  • Brazed long barrel adds mechanical strength under vibration
  • UL 467 listed for grounding and bonding applications
  • Rated 600 V and 302 °F for demanding electrical systems

Specifications

BrandBURNDY
TypeElectrical Connectors

Questions about this item

What stud size and barrel dimensions does the YAD28M12E12 terminal need for mounting?

It fits a 1/2 in stud and has a barrel outside diameter of .89 in, a barrel length of .87 in, and a tongue width of .95 in.

Which crimp tool and die are required for the 4/0 AWG barrel, and what common step is missed?

Use a Burndy tool with the correct die for 4/0 AWG long brazed barrel; the step often missed is fully seating the wire before crimping.

How can I tell when the tin-plated copper contact should be replaced?

Replace it if the tin finish shows heavy oxidation, the copper is discoloured above 302 Degrees F, or the barrel is cracked or deformed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.