We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper lug with two holes, long barrel, straight tongue, pink colour code

Burndy

Burndy Tongue Long Barrel CU Lug 2 Hole 1/0 AWG

SKU CH-1QS9-9FHE0

Copper compression lug with a long barrel, two holes spaced 1.75 in apart, and a .83 in tongue width rated for 35 kV and 194 °F

  • Length5.000
  • MaterialCopper
  • TypeCommercial
  • Copper construction ensures high conductivity
  • Long barrel design provides secure crimp connection
  • Two-hole configuration allows stable mounting
  • UL and CSA certifications confirm safety compliance
  • Rated for 35 kV maximum voltage

Copper Compression Lug

The Burndy copper compression lug is a commercial-grade connector for 1/0 AWG stranded copper wire. It uses a long barrel design with a straight tongue and two mounting holes spaced 1.75 in apart for secure termination in electrical and industrial applications.

Capacity and headroom

Rated for up to 35 kV and a maximum operating temperature of 194 Degrees F, the lug handles high-voltage and elevated-heat environments. The pink colour code and die code 12 identify the correct crimp tooling, while the barrel accepts only 1/0 AWG conductor size with no range above or below that gauge.

Upgrade path

This lug replaces single-hole or short-barrel connectors when a two-hole pattern and 1.75 in centre spacing are required by the busbar or equipment layout. The jump is worth it when inspection-hole verification is not needed and CSA Certified, UL 486A-486B listed components are specified for the installation.

Highlights

  • Copper construction ensures high conductivity
  • Long barrel design provides secure crimp connection
  • Two-hole configuration allows stable mounting
  • UL and CSA certifications confirm safety compliance
  • Rated for 35 kV maximum voltage

Specifications

BrandBurndy
Length5.000
MaterialCopper
TypeCommercial

Questions about this item

Will the 1/0 AWG copper lug fit the existing 1/0 AWG stranded copper cable I already have installed?

Yes, the lug is rated for a minimum and maximum of 1/0 AWG stranded copper, so it matches that conductor size exactly.

How can I verify the crimp is correct once the lug is installed?

Use a die marked with code 12 or 348; the pink colour code on the barrel also confirms the proper tool setting for this lug.

Does the package include mounting bolts for the two 1/2 in stud holes spaced 1.75 in apart?

No, only the copper compression lug is supplied; mounting hardware for the 1/2 in studs must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.