We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper compression lug with single hole and belled barrel

Burndy

Burndy Std Belled Barrel CU Lug 1Hole 1000kcmil

SKU CH-XFZG-90CZ6

A one-hole copper compression lug with a belled barrel for 1000 kcmil conductors, CSA certified and UL listed to 486A-486B standards

  • Length4.900
  • TypeCommercial
  • One-hole design simplifies single-stud termination
  • Belled straight barrel eases cable insertion
  • Copper construction carries 1000 kcmil conductors
  • CSA certified and UL 486A-486B listed
  • Rated to 194 °F maximum operating temperature

Burndy 1000 kcmil Copper Lug

This Burndy compression lug accepts 1000 kcmil copper conductors in a one-hole belled barrel design. The commercial-grade connector carries CSA certification and UL 486A-486B listing for code-compliant installations. A white colour code and die code 1 simplify crimp-tool selection on the job site.

Suited for large-feeder terminations

Electricians pulling 1000 kcmil copper into switchgear or panelboards will find the straight barrel and 5/8 inch stud hole match common bus-bar patterns. Installations requiring multi-hole NEMA spacing or aluminium conductor compatibility must use a different lug style.

White colour code and die code 1

The factory-applied white marking identifies the correct crimp die at a glance, reducing mis-crimps during high-volume work. Belled barrel entry eases insertion of stiff 1000 kcmil strands, while the UL-listed rating confirms the connector meets 194 °F maximum operating temperature requirements.

Highlights

  • One-hole design simplifies single-stud termination
  • Belled straight barrel eases cable insertion
  • Copper construction carries 1000 kcmil conductors
  • CSA certified and UL 486A-486B listed
  • Rated to 194 °F maximum operating temperature

Specifications

BrandBurndy
Length4.900
TypeCommercial

Questions about this item

What cable size must I already have to use this 1000 kcmil lug?

You need 1000 kcmil copper cable; the lug is sized for that conductor and will not fit smaller or larger wire.

Will this belled-barrel lug work with standard compression dies I already own?

Yes — it uses Die Code 1 (032) and a white colour code, matching common Burndy tooling for 1000 kcmil terminations.

How can I confirm the lug is properly compressed after installation?

Check that the barrel is fully collapsed around the conductor with no visible gaps and that the die-code 1 imprint is clear on the barrel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.