We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small unplated aluminum L-shaped connector with two ports and hex heads

Burndy

Burndy Multi Tap Connector 10AWG 2.13In 2 Port L Aluminum

SKU CH-NTX8-FEWBY

A two-port aluminium connector with single-sided L entry for 10 AWG to 250 kcmil copper or aluminium conductors, rated 600 V and 194 °F maximum temperature

  • Length2.000
  • MaterialAluminum
  • Type2 Ports, Single Sided Entry, L
  • Two-port design simplifies wire distribution
  • Single-sided entry eases installation in tight spaces
  • Aluminum body resists corrosion for long service life
  • Rated 600 V and 194 °F for demanding circuits
  • UL 94 V-0 and RoHS compliant for safety and environmental standards

Two-Port L Aluminum Connector

The Burndy Multi Tap Connector accepts stranded copper conductors from 10 AWG up to 250 kcmil in two ports with single-sided entry. Its aluminum body is unplated and insulated with Plastisol rated UL 94 V-0 for flammability resistance. The connector operates at up to 600 V and 194 degrees F, and it complies with RoHS requirements.

Hex-Head Mounting And Daily Use

Each port is secured by a 5/16 inch hex-head set screw, allowing straightforward installation with a standard driver. The L-shaped layout keeps cables on one side, which helps maintain neat routing inside panels or junction boxes. Aluminum construction reduces weight compared with copper alternatives while still accepting both aluminum and copper conductors.

Upgrade From Single-Hole Lugs

This connector replaces individual compression lugs or split bolts when two conductors must join at a single point. The jump is worthwhile when a clean, insulated, two-way splice is needed without stacking separate connectors. Builders who require more than two ports or a different entry orientation will need a different multitap style.

Highlights

  • Two-port design simplifies wire distribution
  • Single-sided entry eases installation in tight spaces
  • Aluminum body resists corrosion for long service life
  • Rated 600 V and 194 °F for demanding circuits
  • UL 94 V-0 and RoHS compliant for safety and environmental standards

Specifications

BrandBurndy
Length2.000
MaterialAluminum
Type2 Ports, Single Sided Entry, L

Questions about this item

What voltage does the 600 V rating on this Burndy Multi Tap Connector cap in practice?

The 600 V rating is the maximum operating voltage for the connector when used with aluminium or copper conductors up to 250 kcmil.

What clearance does the 2.13 in length and 5/16 in hex head need to fit and mount?

The body measures 2.13 in long and the hex head is 5/16 in across flats, so allow at least that depth and wrench swing space in the enclosure.

How is the connector installed and which step is often missed?

Strip each conductor, insert fully into the two ports, then torque the 5/16 in hex set screws to the manufacturer's specified value — skipping the torque step is the common error.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.