We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three bronze flanged sleeve bearings with 5/8 inch bore

Bunting Bearings

Bunting Bearings EF101416 flanged sleeve bearing 5/8 in bore pack of 3

SKU CH-3ACQ-SHEPA

Pack of three flanged sleeve bearings with 5/8 in bore, sintered bronze construction and SAE 30 oil self-lubrication for 10 to 220 °F operation

  • Flanged design simplifies axial location in housings
  • Sintered bronze construction provides self-lubricating operation with SAE 30 oil
  • Temperature range from 10 to 220 degrees F suits varied environments
  • Pack of three bearings reduces reorder frequency for maintenance
  • Precision length tolerance of +/- .005 in ensures consistent fit

Flanged sleeve bearing for precise fits

The Bunting Bearings EF101416 is a bronze flanged sleeve bearing with a 5/8 in bore and 7/8 in outside diameter. It is sold as a pack of three for maintenance or assembly work that requires multiple identical bushings. The sintered bronze body is self-lubricating with SAE 30 oil and carries a California Proposition 65 warning for cancer and reproductive harm.

Self-lubricating bronze frees external oil lines

The bearing operates from 10 to 220 degrees F without added lubrication, so the surrounding design does not need a separate oiling system. Its 1.125 in flange diameter and .125 in flange thickness locate the bearing axially while the 1 in overall length with a .005 in tolerance supports consistent alignment in the housing.

Sintered material handles steady heat and vacuum

Under sustained load the self-lubricating bronze maintains its film at temperatures up to 220 degrees F and remains functional in vacuum environments. The metallic material group resists wear during continuous rotation without the performance drop that can occur when grease breaks down or migrates away.

Highlights

  • Flanged design simplifies axial location in housings
  • Sintered bronze construction provides self-lubricating operation with SAE 30 oil
  • Temperature range from 10 to 220 degrees F suits varied environments
  • Pack of three bearings reduces reorder frequency for maintenance
  • Precision length tolerance of +/- .005 in ensures consistent fit

Specifications

No published specifications for this item yet.

Questions about this item

What temperature limit does the 220°F maximum reach under sustained use?

The sintered bronze bearing is rated for a maximum operating temperature of 220°F, so sustained loads must stay below that threshold to avoid material degradation.

How much heat and noise does the self-lubricating SAE 30 oil design produce during all-day operation?

The self-lubricating bronze sleeve runs without external grease, generating minimal friction noise and steady heat that stays within the 10°F to 220°F operating range.

What shaft size must I already have for the 5/8 in bore to fit correctly?

The bearing requires a 5/8 inch diameter shaft; its bore tolerance is held to ±0.005 in so the shaft must match that nominal size for proper clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.