We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze flanged sleeve bearing with 3/8 inch bore and 1/2 inch outside diameter

Bunting Bearings

Bunting Bearings EF060808 Flanged Sleeve Bearing Bronze 3/8 in Bore 1/2 in OD

SKU CH-1GSS-6QWPG

A flanged sleeve bearing with a 3/8 in bore, 1/2 in outside diameter and 1/2 in overall length, made from sintered bronze that is self-lubricating with SAE 30 oil for vacuum environments from 10

  • Self-lubricating design cuts maintenance with SAE 30 oil impregnation
  • Flanged sleeve locates shaft axially using .687 in flange diameter
  • Sintered bronze construction handles 10 to 220 Degrees F operating range
  • Precision bore fits 3/8 in shafts within +/- .005 in tolerance
  • Compact half-inch length suits tight assemblies with .062 in flange thickness

Product Identity

The Bunting Bearings EF060808 is a flanged sleeve bearing made from sintered bronze for inch-based machinery. It suits maintenance engineers and OEM assemblers who need a self-lubricating plain bearing with a 3/8 in bore and 1/2 in outside diameter.

Compatibility Check

Verify that the shaft diameter matches the 3/8 in bore and that the housing can accept the 1/2 in outside diameter and 0.687 in flange diameter. Confirm the operating temperature stays between 10 and 220 degrees F and that SAE 30 oil is acceptable for the lubrication environment.

Build Integration

The flanged design locates the bearing axially and handles thrust loads without extra hardware. Self-lubricating bronze frees the assembly from external oil lines or grease fittings. Overall length is 1/2 in with a 0.062 in flange thickness and a length tolerance of +/- 0.005 in.

Highlights

  • Self-lubricating design cuts maintenance with SAE 30 oil impregnation
  • Flanged sleeve locates shaft axially using .687 in flange diameter
  • Sintered bronze construction handles 10 to 220 Degrees F operating range
  • Precision bore fits 3/8 in shafts within +/- .005 in tolerance
  • Compact half-inch length suits tight assemblies with .062 in flange thickness

Specifications

No published specifications for this item yet.

Questions about this item

What is included with the EF060808 bearing and do I need separate lubricant?

The bearing is supplied as a single flanged sleeve unit. It is self-lubricating with SAE 30 oil impregnated in the sintered bronze, so no additional lubricant is required for installation.

How do I choose between the available EF060808 variants?

This part number defines one specific size: 3/8 in bore, 1/2 in outside diameter, 1/2 in overall length and a 0.687 in flange diameter. Select it when those exact dimensions match your shaft and housing.

What does the 220 Degrees F maximum temperature mean for my application?

The bronze material and oil impregnation remain stable up to 220 °F. Continuous operation above this limit can degrade the lubricant and reduce bearing life, so keep the running temperature below that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.