We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze sleeve bearing cylindrical shape plain finish

Bunting Bearings

Bunting Bearings CB202422 Bronze Sleeve Bearing 1 1/4 in Bore 1 1/2 in OD 2 3/4 in Length

SKU CH-Y3PD-AQY21

Bronze sleeve bearing with 1 1/4 in bore, 1 1/2 in OD and 2 3/4 in length, rated from -450 to 500 °F and made from C93200 alloy

  • Bronze construction resists wear in heavy-duty applications
  • Cast C93200 alloy meets SAE 660 specification for reliable performance
  • Operates from -450 °F to 500 °F across extreme environments
  • Precision 1 1/4 in bore with ±0.005 in length tolerance ensures accurate fit
  • Non-flanged sleeve design suits straight-bore mounting requirements

Product identity

This is a Bunting Bearings CB202422 bronze sleeve bearing with a 1 1/4 inch bore, 1 1/2 inch outside diameter and 2 3/4 inch length. It is made from cast bronze grade C93200 (SAE 660) and suits machinery needing a plain, non-flanged bearing in inch dimensions.

Installation notes

Press the bearing into a properly sized housing; the length tolerance is +/- 0.005 inch so alignment matters. No flange means axial location must be provided by the surrounding assembly, and the bronze material requires adequate lubrication during operation.

Deciding specification

The maximum operating temperature is 500 degrees F and the minimum is -450 degrees F, which determines whether the bearing survives the thermal environment of the application.

Highlights

  • Bronze construction resists wear in heavy-duty applications
  • Cast C93200 alloy meets SAE 660 specification for reliable performance
  • Operates from -450 °F to 500 °F across extreme environments
  • Precision 1 1/4 in bore with ±0.005 in length tolerance ensures accurate fit
  • Non-flanged sleeve design suits straight-bore mounting requirements

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the CB202422 sleeve bearing is seated correctly after installation?

Verify the 1 1/4 in bore fits the shaft with a light press fit and the 1 1/2 in outside diameter sits fully in the housing; the bearing should rotate freely without binding once assembled.

What comes with the CB202422 and what must I source separately?

The box contains only the cast bronze C93200 sleeve bearing measuring 2 3/4 in long; you must supply the shaft, housing, and any lubricant required for your application.

Which CB202422 specification should I match to my design requirements?

Select based on the 1 1/4 in bore, 1 1/2 in outside diameter, 2 3/4 in length, C93200 (SAE 660) bronze grade, and the -450 °F to 500 °F operating temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.