We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small bronze sleeve bearings cylindrical plain finish

Bunting Bearings

Bunting Bearings CB070908 Sleeve Bearing Bronze 7/16 in Bore Pack of 3

SKU CH-P055-WEFZT

Three bronze sleeve bearings with a 7/16-inch bore and one-inch length, rated from -450 °F to 500 °F

  • Ready for extreme cold with -450 °F minimum rating
  • Handles high heat up to 500 °F operating temperature
  • Precision fit backed by ±0.005 in length tolerance
  • Durable C93200 bronze alloy resists wear
  • Three bearings per pack simplifies maintenance stocking

Bronze Sleeve Bearing 7/16 in Bore Pack of 3

These plain bearings are machined from cast bronze grade C93200 for general-purpose rotary or linear motion. They suit maintenance teams, hobbyists and light-industrial builders who need a simple, lubrication-friendly journal bearing in inch dimensions.

Temperature and Fit Limits

The material withstands a continuous range from -450 to 500 degrees Fahrenheit. The bore measures 7/16 in and the outside diameter 9/16 in with a length tolerance of +/- 0.005 in, so the housing and shaft must be sized to deliver the correct running clearance for the application.

Straightforward Press Fit

Installation is a standard press operation into a correctly bored housing; no flanges or snap rings are present to locate the bearing. The most common issue is an oversize or undersize bore that either prevents seating or allows the bearing to spin in its housing.

Highlights

  • Ready for extreme cold with -450 °F minimum rating
  • Handles high heat up to 500 °F operating temperature
  • Precision fit backed by ±0.005 in length tolerance
  • Durable C93200 bronze alloy resists wear
  • Three bearings per pack simplifies maintenance stocking

Specifications

No published specifications for this item yet.

Questions about this item

How do I decide between the pack of three and other pack sizes for the CB070908 sleeve bearing?

The CB070908 is sold as a pack of three bearings, each with a 7/16 in bore, 9/16 in outside diameter and 1 in overall length. Order multiples of this pack if you need more than three pieces.

What does the 500 °F maximum temperature mean when the bearing is installed in equipment?

The C93200 bronze material is rated for continuous operation up to 500 °F and down to -450 °F, so the bearing will maintain its dimensions and load capacity throughout that range once pressed into a housing.

How does the inch-based sizing of the CB070908 affect fit with standard shafts and housings?

The bearing uses inch dimensions — 7/16 in bore, 9/16 in OD, 1 in length with a ±0.005 in length tolerance — so it matches common fractional-inch shafts and reamed housings without metric conversion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.