BUCIER
BUCIER DP202C-USB2.0-H Dual Monitor DP KVM Switch 2 Computers 4K@60Hz 3 USB 2.0 Audio Mic
A dual-monitor DisplayPort KVM switch lets two computers share one keyboard, mouse, dual 4K@60 Hz displays, three USB 2.0 ports and separate audio and microphone outputs.
- TypePull Cord Switch
- PC SelectionPull Cord Switch
- Power Features5 volts
- Weight0.5 kilograms
- Control two computers with one keyboard, mouse and dual monitors
- Dual DisplayPort outputs deliver up to 4K at 60 Hz
- Three USB 2.0 ports plus separate audio and microphone jacks
- Switch via front button or wired remote cable
- Back-panel cable routing keeps the desk tidy
Dual-DisplayPort KVM for two computers
This BUCIER DP202C-USB2.0-H switch lets you control two desktops or laptops with one keyboard, one mouse and two DisplayPort monitors. Each system must provide two DisplayPort outputs and support extended-desktop mode. The unit draws 5 V from the included adapter and weighs 0.5 kg.
Thermals noise and power
Passive cooling keeps the device silent during normal operation. Power consumption is limited to the 5 V supply, so no additional power-supply capacity is required. No fan noise or heat-related throttling occurs in typical office or home use.
Upgrades from single-head or USB-only KVMs
The jump is worthwhile when you need true dual-monitor 3840x2160 at 60 Hz YUV 4:4:4 switching without the latency of software solutions. It replaces setups that rely on a single video cable or USB 2.0-only sharing. Not suited for users who require 8K, 100 Hz, 120 Hz or 144 Hz refresh rates, or who need more than three USB 2.0 ports.
Highlights
- Control two computers with one keyboard, mouse and dual monitors
- Dual DisplayPort outputs deliver up to 4K at 60 Hz
- Three USB 2.0 ports plus separate audio and microphone jacks
- Switch via front button or wired remote cable
- Back-panel cable routing keeps the desk tidy
Specifications
| Brand | Arkidyn Plus |
|---|---|
| Model | 785034669705 |
| Part Number | DP202C-USB2.0-H |
| Type | Pull Cord Switch |
| PC Selection | Pull Cord Switch |
| Power Features | 5 volts |
| Weight | 0.5 kilograms |
Questions about this item
How do I install the BUCIER DP202C-USB2.0-H and what step is often missed?
Connect the 5 V DC adapter first, then plug both DisplayPort and USB cables from each computer into the rear ports; the step people skip is powering the unit before connecting the video and data links.
What maintenance or replacement will the BUCIER DP202C-USB2.0-H need later?
The switch has no user-serviceable parts; if the 5 V power adapter fails, replace it with an equivalent 5 V DC supply, otherwise the unit is maintenance-free.
What limit appears first during sustained 4K@60 Hz use on the BUCIER DP202C-USB2.0-H?
The DP 1.2 link caps video at 3840×2160 60 Hz YUV 4:4:4; higher refresh rates such as 100, 120 or 144 Hz and 8K resolutions are not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



