BTF-LIGHTING FCOB RGBW 3000K LED Strip Kit 16.4FT 12V 12mm IP30
A 16.4 ft indoor LED strip kit with FCOB RGBW chips, 896 LEDs per metre, 12 V power, CRI over 90, dimmable colour mixing and an RF remote controller
- TypeLED Light Fixtures
- Lamp TypeLED
- LocationIndoor
- Housing ColorRGB+Warm White
- Compatibility/FitmentFCOB5MRGBWW12VSP614E
- Voltage12
- Uniform, dot-free glow from 896 LEDs per metre FCOB technology
- 16 million colours plus pure 3000 K white via RF remote
- Dimmable and tunable output for mood or task lighting
- UL Listed with double-layer copper PCB for safe, cool running
- Peel-and-stick 3M tape on 12 mm strip for tool-free indoor install
Indoor LED Strip Kit
This 16.4-foot kit uses flip-chip-on-board technology to pack 896 LEDs per metre into a 12 mm wide strip. It produces RGB colour mixing plus a dedicated 3000 K warm white channel for accurate pastel tones. The strip runs on 12 V DC and carries a UL listing for indoor use. An RF remote handles dimming, colour selection and timing functions without line-of-sight requirements.
Installation and Power
Peel-and-stick 3M adhesive mounts the strip on any clean, dry indoor surface; no tools or wiring skills are needed. A 12 V power supply (not included) must match the strip’s voltage and current draw. The IP30 rating means the product is not waterproof, so it suits bedrooms, kitchens or living areas but not bathrooms or outdoor runs. The 180° beam angle spreads light evenly across cabinets, coves or shelves.
Sustained Operation
The double-layer copper PCB helps dissipate heat during continuous runs, supporting a rated lifespan of 65,000-plus hours. The remote’s memory function restores the last scene after power cycles, and a timed-off feature prevents accidental all-night operation. Mixed white at full RGB brightness is not recommended for extended periods; using the dedicated warm white channel reduces thermal load and preserves colour consistency over long sessions.
Highlights
- Uniform, dot-free glow from 896 LEDs per metre FCOB technology
- 16 million colours plus pure 3000 K white via RF remote
- Dimmable and tunable output for mood or task lighting
- UL Listed with double-layer copper PCB for safe, cool running
- Peel-and-stick 3M tape on 12 mm strip for tool-free indoor install
Specifications
| Brand | BTF-LIGHTING |
|---|---|
| Type | LED Light Fixtures |
| Lamp Type | LED |
| Location | Indoor |
| Housing Color | RGB+Warm White |
| Compatibility/Fitment | FCOB5MRGBWW12VSP614E |
| Voltage | 12 |
| Features | Dimmable and Tunable |
| Model | FCOB5MRGBWW12VSP614E |
Questions about this item
Does the strip reach its 45 °C operating limit during continuous full-colour use?
The rated operating temperature tops out at 45 °C; sustained full-colour output at 896 LEDs per metre will push the strip toward that ceiling, so provide airflow and avoid enclosing it.
How much heat and noise does the 12 V kit produce when run all day?
The LED strip itself is silent and the double-layer copper PCB spreads heat; the external 12 V supply will emit some warmth and faint coil noise, but the strip stays at IP30, 180 ° beam angle with no moving parts.
What power supply and controller must I already have to run the 16.4 ft reel?
You need a DC 12 V supply rated for the total wattage of 16.4 ft at 896 LEDs/m and the included RF remote controller; no separate smart hub or wiring harness is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
L.H. DOTTIE
L.H. DOTTIE 630 Top Mount Fluorescent Fixture Hanger No 10 Gauge 100PK
$68.99
0.00083102BTC
In stock
L.H. DOTTIE
L.H. DOTTIE 629 Side Mount Fluorescent Fixture Hanger No 10 Gauge
$65.99
0.00079489BTC
In stock