BTF-LIGHTING FCOB-12V-480L-W-IP30 light fixture 12V 480LED/m 3000K 16.4FT IP30
High-density FCOB strip delivers 480 LEDs per metre at 3000 K with CRI 90+ for spotless indoor lighting
- TypeLED Light Fixtures
- Lamp TypeLED
- LocationIndoor
- ShapeStrip Lights
- Housing ColorWarm White 3000K
- Color Temperature3000 kelvin
- Spot-free uniform glow from 480 LEDs per metre FCOB strip
- Warm 3000 K light with CRI above 90 for accurate indoor colour
- 12 V DC input at 18 watts total for low-energy operation
- UL listed safety with 3M tape backing for tool-free peel-and-stick install
- Cuttable every segment and linkable via 5.5 mm DC plugs for custom runs
16.4 FT FCOB LED Strip Light
This 12 V DC flexible strip uses Flip Chip On Board technology with 480 LEDs per metre to produce warm white 3000 K illumination at a CRI above 90. The 8 mm wide tape light runs 16.4 feet total and draws 18 watts overall. UL listed construction includes a double-layer copper PCB and strong 3M adhesive backing for tool-free indoor installation.
Indoor DIY projects needing uniform linear light
Suits cabinet accents, cove lighting, TV backlighting and bedroom or living-room ambient runs where spot-free output and high colour fidelity matter. Not for outdoor, bathroom or wet-area use because the IP30 rating offers no water protection. Buyers who need dimming must supply a compatible 12 V driver or controller; none is included in the package.
480 LEDs per metre density decides uniformity
The FCOB package places emitters close enough to eliminate visible hot-spots while delivering 80 to 100 lumens per watt at 3000 K. Cut points repeat every few centimetres and 5.5 mm × 2.1 mm DC plugs on both ends allow series linking. If a project demands lower density, wider cut spacing or an integrated controller, a different strip type is required.
Highlights
- Spot-free uniform glow from 480 LEDs per metre FCOB strip
- Warm 3000 K light with CRI above 90 for accurate indoor colour
- 12 V DC input at 18 watts total for low-energy operation
- UL listed safety with 3M tape backing for tool-free peel-and-stick install
- Cuttable every segment and linkable via 5.5 mm DC plugs for custom runs
Specifications
| Brand | BTF-LIGHTING |
|---|---|
| Type | LED Light Fixtures |
| Lamp Type | LED |
| Location | Indoor |
| Shape | Strip Lights |
| Housing Color | Warm White 3000K |
| Color Temperature | 3000 kelvin |
| Size/Dimensions | 15 cm x 15 cm x 1.5 cm |
| Temperature Range | 3000 kelvin |
| Compatibility/Fitment | FCOB-12V-480L-W-IP30, FOB5M12V480LWWW30 |
| Voltage | 12 |
| Watts | 18 watts |
| Standards/Certifications | IP20 |
| Features | No Light spot |
| Model | FCOB-12V-480L-W-IP30 |
| Part Number | FOB5M12V480LWWW30 |
Questions about this item
What power supply must I already own to run this 12 V strip?
A DC 12 V power source or dimmable LED driver rated for at least 18 watts total, with a 5.5 mm × 2.1 mm plug to match the strip's connectors.
Will the 480 LED/m density work with my existing ELV or TRIAC dimmer?
Yes, the strip is compatible with standard ELV, TRIAC, DMX, DALI and 0-10 V dimmers when paired with a suitable dimmable driver.
How can I verify the 3000 K warm white output is uniform after installation?
Check for a continuous spotless line with no visible light dots and confirm the CRI exceeds 90 for accurate colour rendering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
L.H. DOTTIE
L.H. DOTTIE 630 Top Mount Fluorescent Fixture Hanger No 10 Gauge 100PK
$68.99
0.00083076BTC
In stock
L.H. DOTTIE
L.H. DOTTIE 629 Side Mount Fluorescent Fixture Hanger No 10 Gauge
$65.99
0.00079464BTC
In stock