We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular hot-swappable XFP transceiver module with LC duplex connector, matte metal finish, 0.3 by 0.7 by 2.8 inches

Brute Networks

Brute Networks XFP-10GLR-OC192SRProduct 10GBASE-LR 1310nm 10km SFP transceiver

SKU CH-6ZT4-14VEJ MPN XFP-10GLR-OC192SRProduct

A hot-swappable XFP transceiver provides 10 Gbps single-mode connectivity at 1310nm over 10 km with LC duplex interfaces

  • Device TypeTransceiver
  • StandardsSMF
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • ProtocolsHCRP, SPP
  • Ports10GBase-LR
  • 10 Gbps throughput for high-speed data links
  • 10 km reach over single-mode fibre at 1310 nm
  • Hot-swappable XFP form factor for quick upgrades
  • Commercial 0 °C to 70 °C operating range
  • 100 % Cisco compatible with MSA compliance

10km Single-Mode Transceiver

The Brute Networks XFP-10GLR-OC192SRProduct is a hot-swappable 10GBASE-LR module built for 10 Gbps links over single-mode fibre. It targets network engineers extending campus or metro connections between Cisco SPA-equipped chassis. The LC duplex interface supports 1310nm transmission up to 10km. Commercial temperature rating allows deployment in standard wiring closets.

Distance and Temperature Limits

Single-mode fibre reaches 10km at 1310nm, beyond which signal budget requires amplification or a different wavelength. The module operates from 0 to 70 °C, so outdoor cabinets without climate control may exceed the range. Compatibility is validated for Cisco SPA-OC192POS-XFP and SPA-1XTENGE-XFP adapters only; other line cards are not guaranteed. Hot-swap capability permits replacement without chassis power-down.

Cisco SPA Compatibility Decides Fit

The single specification that determines suitability is verified operation with Cisco Shared Port Adapters SPA-OC192POS-XFP and SPA-1XTENGE-XFP. If the target slot uses a different SPA or a non-Cisco platform, the transceiver will not be recognised. No other parameter overrides this constraint.

Highlights

  • 10 Gbps throughput for high-speed data links
  • 10 km reach over single-mode fibre at 1310 nm
  • Hot-swappable XFP form factor for quick upgrades
  • Commercial 0 °C to 70 °C operating range
  • 100 % Cisco compatible with MSA compliance

Specifications

BrandCISCO
ModelXFP-10GLR-OC192SR
Device TypeTransceiver
StandardsSMF
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
ProtocolsHCRP, SPP
Ports10GBase-LR
Max Distance10km
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0� ~ 70� C
Weight2 oz.
DisclaimerThird Party product. Part number XFP-10GLR-OC192SR is property of Cisco.

Questions about this item

Should I choose the 10km LR module or a different reach for my link?

Choose this 10km LR module when your single-mode fiber run is up to 10 km; shorter links can use an SR module, while longer spans need ER or ZX variants.

What does the 10 Gbps rate deliver in a live chassis?

The module provides a 10 Gbps serial lane over single-mode fiber at 1310 nm, giving full line-rate 10G Ethernet or OC-192 POS throughput across the 10 km budget.

Which interface standard does the LC connector implement and what distance does it cap?

The dual LC connector follows the 10GBASE-LR / OC-192 LR standard, limiting reach to 10 km on single-mode fiber.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.