We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal SFP+ transceiver module with LC duplex connector and side label

Brute Networks

Brute Networks XBR-000181 10GBASE-SR 300m 850nm SFP+ transceiver

SKU CH-9RY4-2WGQQ

Connects 10 Gbps links over multi-mode fibre up to 300 m at 850 nm with LC duplex interface

  • Device TypeTransceiver
  • StandardsMMF
  • Wavelength850nm
  • Fiber CableMulti-mode Optical Fiber
  • Ports10GBase-SR
  • Max Distance300m
  • 10 Gbps transfer rate over 300 m multi-mode fibre
  • 850 nm wavelength suits short-range data-centre links
  • LC duplex connector enables hot-plug installation
  • Commercial 0 °C to 70 °C operating range
  • 100 % Brocade compatible and MSA compliant

10GBASE-SR SFP+ transceiver

The Brute Networks XBR-000181 is a 10 Gbps SFP+ transceiver built for 10GBASE-SR links over multi-mode fibre. It targets network engineers and data-centre operators who need a drop-in module for Brocade switches and MSA-compliant ports. The LC duplex connector supports 850 nm wavelength and a 300 m reach on OM3 or OM4 cabling. Digital diagnostics provide real-time link monitoring.

Thermals and power in normal use

The module operates across a commercial temperature range of 0 to 70 °C without active cooling. Low power draw keeps thermal load minimal inside dense switch chassis. Silent operation suits noise-sensitive racks and office-adjacent network cabinets. MSA compliance ensures consistent electrical and thermal behaviour across qualified platforms.

Upgrade path and fit

This transceiver replaces failed or missing Brocade XBR-000181 units and upgrades 1 Gbps SFP links to 10 Gbps where multi-mode fibre is already installed. The jump is worth it when bandwidth demand exceeds gigabit capacity and the existing fibre plant supports 300 m at 850 nm. It is not for single-mode infrastructure or reaches beyond 300 m.

Highlights

  • 10 Gbps transfer rate over 300 m multi-mode fibre
  • 850 nm wavelength suits short-range data-centre links
  • LC duplex connector enables hot-plug installation
  • Commercial 0 °C to 70 °C operating range
  • 100 % Brocade compatible and MSA compliant

Specifications

BrandBrocade
ModelXBR-000181
Device TypeTransceiver
StandardsMMF
Wavelength850nm
Fiber CableMulti-mode Optical Fiber
Ports10GBase-SR
Max Distance300m
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number XBR-000181 is property of Brocade.

Questions about this item

How do I install the XBR-000181 transceiver and what step is often missed?

Insert the module into an SFP+ port until it clicks, then connect LC duplex cables; the step often missed is removing the dust caps from both the transceiver and the cable ends before linking them.

What maintenance or replacement will the XBR-000181 need over time?

No scheduled maintenance is required; if link errors appear, clean the LC connector end-faces with a fibre cleaning pen and re-seat the module, otherwise the unit runs until a hardware failure occurs.

What limit appears first when the XBR-000181 runs continuously at full load?

The 70 °C upper operating temperature is the first hard limit; sustained 10 Gbps traffic in a hot chassis can push the module to that threshold before any distance or wavelength constraint is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.