We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular X2 transceiver module with SC duplex connector, metal housing, labelled 10GBASE-LR 1310nm 10km

Brute Networks

Brute Networks X2-10GB-LR 10GBASE-LR 10km 1310nm X2 SFP transceiver

SKU CH-PV8V-3DVXX

10 Gbps X2 transceiver reaches 10 km over single-mode fibre at 1310 nm with SC duplex connector

  • Device TypeTransceiver
  • StandardsSMF
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBase-LR
  • Max Distance10km
  • 10 km reach over single-mode fibre at 1310 nm wavelength
  • 10 Gbps transfer rate for high-speed network links
  • Commercial temperature range from 0 to 70 °C
  • 100 % MSA compliant and coded for Cisco compatibility
  • Digital optical monitoring enables real-time link diagnostics

10km 1310nm X2 transceiver

The Brute Networks X2-10GB-LR is a 10GBASE-LR transceiver module coded for full Cisco compatibility. It operates at a 1310nm wavelength over single-mode fibre with an SC duplex connector. Network engineers can deploy it in routers, switches or servers that accept X2 form-factor optics for 10 Gbps long-reach links.

Sustained load behaviour

Digital optical monitoring reports real-time power, temperature and link status while the module runs continuously at 10 Gbps. The commercial temperature rating of 0 to 70 °C ensures stable operation inside rack-mounted equipment under constant traffic. MSA-compliant firmware and laser calibration keep packet integrity consistent over the full 10 km reach.

Practical interface limits

The X2 form factor and SC duplex interface restrict use to hardware with matching slots and patch panels; it will not fit SFP+ or QSFP ports. Single-mode fibre is required to achieve the rated distance, and multimode cabling will not support the 10 km span. Buyers needing higher port density or a different reach must select a module built for that form factor and wavelength.

Highlights

  • 10 km reach over single-mode fibre at 1310 nm wavelength
  • 10 Gbps transfer rate for high-speed network links
  • Commercial temperature range from 0 to 70 °C
  • 100 % MSA compliant and coded for Cisco compatibility
  • Digital optical monitoring enables real-time link diagnostics

Specifications

BrandCISCO
ModelX2-10GB-LR
Device TypeTransceiver
StandardsSMF
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
Ports10GBase-LR
Max Distance10km
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number X2-10GB-LR is property of Cisco.

Questions about this item

How much heat does the X2-10GB-LR generate when running continuously at 10 Gbps?

The module operates within a commercial temperature range of 0 to 70 °C, so it is rated for continuous use at line rate without exceeding that envelope.

Which patch cables and switch ports are required to use this 1310 nm X2 transceiver?

You need single-mode fibre patch cords with SC duplex connectors and a switch or router that accepts X2 modules with 10GBASE-LR support.

Will this 10 km X2 work alongside older 10 Gbps optics already installed in the same chassis?

Yes, it is MSA compliant and coded for Cisco compatibility, so it initialises and performs identically to OEM transceivers in a mixed deployment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.