We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with matte metal body and LC duplex connector visible

Brute Networks

Brute Networks Brocade E1MG-LX-OM 1000BASE-LX 10km 1310nm SFP transceiver

SKU CH-MTMV-WPYKP

A 1 Gbps single-mode SFP transceiver with LC duplex connector, 1310 nm wavelength, 10 km reach and digital monitoring

  • Device TypeTransceiver
  • StandardsSMF
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • Ports1000Base-LX
  • Max Distance10km
  • 10km single-mode reach extends campus links
  • 1310nm wavelength suits standard SMF infrastructure
  • 100% Brocade compatibility ensures drop-in deployment
  • Commercial 0-70°C rating covers indoor environments
  • Digital diagnostics enable real-time link monitoring

Brocade E1MG-LX-OM 10km SFP+ Transceiver

This transceiver module provides 1000BASE-LX connectivity over single-mode fibre at 1310nm. It is designed for network administrators who need a 10km reach on Brocade switches and routers. The unit delivers a 1 Gbps transfer rate and includes digital output monitoring for link diagnostics. It is a third-party module built to meet MSA industry standards and OEM specifications.

Installation uses a standard LC duplex connector

Insert the module into a compatible Brocade port until it clicks, then connect a single-mode fibre patch cord with LC duplex ends. The most common issue is mismatched wavelength or distance ratings on the opposite end, which breaks the link. Ensure the far-side transceiver also runs at 1310nm and supports 10km to avoid signal loss. Operating temperature range is 0 to 70 degrees C for commercial environments.

Verify your switch accepts third-party SFP+

Some Brocade firmware revisions may restrict non-OEM optics or require a command to enable unsupported transceivers. Confirm the target port is configured for 1000BASE-LX speed and single-mode fibre, not multi-mode. Check that your fibre patch cables are single-mode with LC duplex connectors polished for 1310nm operation. The module weighs 2 oz and carries a lifetime warranty from the supplier.

Highlights

  • 10km single-mode reach extends campus links
  • 1310nm wavelength suits standard SMF infrastructure
  • 100% Brocade compatibility ensures drop-in deployment
  • Commercial 0-70°C rating covers indoor environments
  • Digital diagnostics enable real-time link monitoring

Specifications

BrandBrocade
ModelE1MG-LX-OM
Device TypeTransceiver
StandardsSMF
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
Ports1000Base-LX
Max Distance10km
Transfer Rate1 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number E1MG-LX-OM is property of Brocade.

Questions about this item

How do I confirm the E1MG-LX-OM is operating correctly after installation?

Check the Power, Link/Activity, Full-Duplex and Speed LEDs on the module; a steady Power light and active Link/Activity light show the 1000BASE-LX link is up at 1 Gbps over the 10 km single-mode path.

What comes with the transceiver and what must I purchase separately?

The module itself includes an LC duplex connector and Digital Output Monitoring; you must supply single-mode fiber patch cables and a compatible Brocade switch or router port.

Which wavelength and reach version should I select for a 10 km single-mode run?

Choose the 1310 nm, 10 km variant — it is the only model listed and matches the 1000BASE-LX standard for that distance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.