We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact QSFP+ transceiver module with matte metal housing and MTP/MPO connector port

Brute Networks

Brute Networks 40GBASE-SR4 QSFP+ 150m 850nm MTP/MPO

SKU CH-3HYF-6XDDA

A 40 Gbps QSFP+ transceiver for multi-mode fibre, reaching 150 m at 850 nm with an MTP/MPO connector

  • Device TypeTransceiver
  • StandardsMMF
  • Wavelength850nm
  • Fiber CableMulti-mode Optical Fiber
  • Ports40GBase-SR4
  • Max Distance150m
  • 40 Gbps throughput for high-density 40G links
  • 150 m reach over multi-mode fibre at 850 nm
  • MTP/MPO connector enables four-lane parallel optics
  • Commercial 0–70 °C rating suits data-centre racks
  • 100 % HPE-coded compatibility with MSA compliance

40GBASE-SR4 QSFP+ Transceiver

This 40 Gbps transceiver module fits QSFP+ ports on switches, routers or servers and operates over multi-mode fibre at 850 nm. It is built for data-centre links up to 150 metres and runs in commercial temperatures from 0 to 70 °C.

MTP/MPO Connector and Build Quality

An MTP/MPO connector carries the four transmit and four receive fibres in a single plug, reducing patch-panel density and installation time. The module meets MSA specifications and is coded for 100 % HPE compatibility, with digital diagnostic monitoring for real-time link health.

Pre-Installation Checks

Verify that your host equipment accepts third-party QSFP+ modules and that the switch or router port is configured for 40GBASE-SR4 operation. Confirm you have multi-mode fibre with MTP/MPO terminations rated for the 150 metre reach before ordering.

Highlights

  • 40 Gbps throughput for high-density 40G links
  • 150 m reach over multi-mode fibre at 850 nm
  • MTP/MPO connector enables four-lane parallel optics
  • Commercial 0–70 °C rating suits data-centre racks
  • 100 % HPE-coded compatibility with MSA compliance

Specifications

BrandHPE
Model40GBASE-SR4
Device TypeTransceiver
StandardsMMF
Wavelength850nm
Fiber CableMulti-mode Optical Fiber
Ports40GBase-SR4
Max Distance150m
Transfer Rate40 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number 40GBASE-SR4 is property of HPE.

Questions about this item

What reach does the 40GBASE-SR4 standard deliver at 850nm?

The 40GBASE-SR4 interface supports up to 150 metres over multi-mode fibre at 850nm wavelength.

What physical connector and cable type does this module require?

It uses an MTP/MPO connector and needs multi-mode optical fibre patch cords.

How is the transceiver installed in a switch or router?

Insert the module into a QSFP+ cage until it clicks, then connect the MTP/MPO cable; the common mistake is not seating the latch fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.