We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal XFP transceiver module with LC duplex ports and label sticker

Brute Networks

Brute Networks 10G-XFP-LR 10GBase-LR 10km 1310nm XFP Transceiver

SKU CH-RD5W-0DB3Y

A 10 Gbps XFP transceiver for single-mode fibre, reaching 10 km at 1310 nm with LC duplex connectors and digital monitoring

  • Device TypeTransceiver
  • StandardsSMF
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBase-LR
  • Max Distance10km
  • 10 km reach on single-mode fibre at 1310 nm wavelength
  • 10 Gbps transfer rate for high-speed links
  • Commercial temperature range 0 to 70 °C
  • 100 % MSA compliant and Brocade compatible
  • Digital diagnostic monitoring enables real-time link health

Brocade-Compatible 10km XFP Transceiver

The Brute Networks 10G-XFP-LR is a 10 Gbps XFP transceiver built for single-mode fibre links up to 10 km. It operates at a 1310 nm wavelength and uses an LC duplex connector. The module is coded for full Brocade compatibility and meets MSA industry standards. It suits network engineers upgrading or expanding Brocade switches, routers or servers.

Single-Mode Reach and Temperature Limits

Single-mode fibre carries the signal the full 10 km without repeaters. The transceiver is rated for commercial temperatures from 0 to 70 °C, so it stays within spec in standard data-centre cabinets. Outside that range the laser and receiver may drift, causing link errors or permanent damage. Digital optical monitoring is supported for real-time health checks.

10 Gbps Throughput Headroom

At 10 Gbps the module handles typical enterprise uplinks, storage replication and inter-switch trunks with comfortable margin. It will saturate if aggregate traffic consistently exceeds the line rate, and the 10 km reach cannot be extended without intermediate amplification. The fixed 1310 nm wavelength also prevents wavelength-division multiplexing on the same fibre pair.

Highlights

  • 10 km reach on single-mode fibre at 1310 nm wavelength
  • 10 Gbps transfer rate for high-speed links
  • Commercial temperature range 0 to 70 °C
  • 100 % MSA compliant and Brocade compatible
  • Digital diagnostic monitoring enables real-time link health

Specifications

BrandBrocade
Model10G-XFP-LR
Device TypeTransceiver
StandardsSMF
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
Ports10GBase-LR
Max Distance10km
Transfer Rate10 Gbps
LEDsPower, Link/Activity, Full-Duplex, and Speed
Temperature0? ~ 70? C
Weight2 oz.
DisclaimerThird Party product. Part number 10G-XFP-LR is property of Brocade.

Questions about this item

Which wavelength and distance version should I pick for a 10 km single-mode link?

This module operates at 1310 nm and is rated for 10 km over single-mode fibre with an LC duplex connector.

What does the 10 Gbps transfer rate mean once the transceiver is installed in a switch?

It delivers a 10 Gbps line-rate 10GBASE-LR signal compatible with Brocade ports and MSA-compliant hosts.

What interface standard does the XFP form factor use and what distance does it cap at?

The XFP module follows the 10GBASE-LR standard and reaches 10 km over single-mode fibre at 1310 nm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.