We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear yellow polyethylene bag spill kit with absorbents and PPE

Brady Spc Absorbents

Brady Spc Absorbents SKA-CFB Spill Kit 15 gal Clear/Yellow Bag traffic safety equipment

SKU CH-0942-Z3K7E

Filled spill kit absorbs up to 15 gal of universal fluids and includes pads, socks, a pillow, nitrile gloves, goggles, disposal bags and instructions in a clear/yellow polyethylene bag

  • ColorClear/Yellow
  • MaterialHAWA
  • Absorbs up to 15 gal of universal fluids
  • Clear/yellow polyethylene bag stores kit at 25-1/2 in. L x 17 in. W x 4 in. H
  • Includes 32 pads, 5 socks, 1 pillow, gloves and goggles for immediate response
  • Meets EPA 40 CFR 112.7 and OSHA 29 CFR 1910 standards
  • Supplied with disposal bags and emergency response handbook for compliant cleanup

Spill Kit for 15 gal Absorption

The Brady SKA-CFB is a filled spill response kit rated to absorb up to 15 gallons of universal fluids. It ships in a clear/yellow polyethylene bag containing sorbent pads, socks, a pillow, nitrile gloves, goggles, disposal bags and an instruction sheet. The kit meets EPA 40 CFR 112.7(c)(1)(vii) and OSHA 29 CFR 1910.120(j)(1)(vii) standards. It is designed for immediate deployment in industrial or commercial settings.

Suits Facilities Needing 15 gal Response

This kit suits workplaces that require a grab-and-go solution for spills up to 15 gallons and prefer bagged storage over a drum. Operations facing larger-volume incidents or needing an overpack drum for UN-rated shipping should evaluate higher-capacity kits. Sites with fluid-specific hazards such as aggressive chemicals may need compatible absorbents.

Absorption Capacity Decides Fit

The single specification that determines suitability is the 15 gallon absorption rating per kit. If your spill risk assessment calls for containing more than 15 gallons in a single event, this unit will not provide enough sorbent material. Match the kit capacity to your maximum credible spill volume.

Highlights

  • Absorbs up to 15 gal of universal fluids
  • Clear/yellow polyethylene bag stores kit at 25-1/2 in. L x 17 in. W x 4 in. H
  • Includes 32 pads, 5 socks, 1 pillow, gloves and goggles for immediate response
  • Meets EPA 40 CFR 112.7 and OSHA 29 CFR 1910 standards
  • Supplied with disposal bags and emergency response handbook for compliant cleanup

Specifications

ColorClear/Yellow
BrandBRADY SPC ABSORBENTS
MaterialHAWA

Questions about this item

How do I set up the 15-gal spill kit so the socks contain the spill before I lay the 32 pads?

Open the clear/yellow polyethylene bag, place the five 48-inch sorbent socks around the leak to form a barrier, then cover the area with the 15-by-19-inch pads and use the pillow for any pooled liquid.

Which items in the kit must be replaced after a single use and which can stay?

All 32 pads, five socks, one pillow, two disposal bags, the nitrile gloves and the goggles are single-use; only the instruction sheet and the empty polyethylene bag can be kept for the next refill.

At what point does the kit stop absorbing during a large, continuous leak?

The absorbents are rated for up to 15 gal total; once the combined uptake of the pads, socks and pillow reaches that volume they saturate and fluid will bypass the barrier.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.