Brady Spc Absorbents
Brady Spc Absorbents SB-SL46 Containment Berm 4x6 ft 119 gal Yellow
Collapsible spill containment berm holds 119 gal with fold-down sides for drive-in access and flat storage
- TypeFacility & Worksite Safety
- Color MappingYellow
- Collapsible design stores flat when not in use
- 119 gal capacity handles large spill volumes
- Fold-down sidewalls allow vehicle or equipment access
- Yellow fabric construction rated for indoor and outdoor use
- Meets EPA 40 CFR 112.7(c)(1)(vii) and OSHA 29 CFR 1910.120(j)(1)(vii) standards
Portable Spill Containment Berm
The Brady SB-SL46 is a collapsible rectangular berm built for temporary fluid containment around equipment, drums, tanks or vehicles. It folds flat for storage and deploys quickly in indoor or outdoor settings. The fold-down sidewalls allow vehicle or equipment access when lowered. This unit targets worksites needing EPA and OSHA compliant secondary containment.
119 Gallon Capacity and 8 Inch Sidewalls
The berm provides up to 119 gal of containment volume within a 4 ft by 6 ft footprint. Eight inch high sidewalls supported by struts with sleeves hold the shape during use. It handles incidental spills and drips from parked machinery or stored containers. Capacity runs out with large-volume tank ruptures or continuous high-flow releases exceeding the rated volume.
Fabric Construction for Flat Storage
The fabric construction keeps the berm lightweight and allows it to store flat when not deployed. No permanent installation or anchoring hardware is required for basic operation. It frees up floor space between uses and moves easily between indoor and outdoor locations. Buyers needing rigid walls, drive-in entry without lowering sides, or chemical-specific material ratings should evaluate other options.
Highlights
- Collapsible design stores flat when not in use
- 119 gal capacity handles large spill volumes
- Fold-down sidewalls allow vehicle or equipment access
- Yellow fabric construction rated for indoor and outdoor use
- Meets EPA 40 CFR 112.7(c)(1)(vii) and OSHA 29 CFR 1910.120(j)(1)(vii) standards
Specifications
| Brand | BRADY |
|---|---|
| Type | Facility & Worksite Safety |
| Color Mapping | Yellow |
Questions about this item
Will the 4 ft x 6 ft berm with 8 in sidewalls sit flat on my existing concrete pad without extra anchoring?
The collapsible design stores flat and deploys on any level surface; the fabric construction and fold-down sidewalls rely on the weight of contained liquid to hold position, so no permanent anchors are required on concrete.
How do I confirm the 119 gal capacity is holding after I unfold the berm?
Pour water until the level reaches the top of the 8 in sidewalls — that volume equals the rated 119 gal, and the yellow fabric makes the fill line easy to see.
Does the SB-SL46 package include the struts and sleeves, or must I order them separately?
The berm ships complete with the sidewall struts already inserted in their sleeves, so nothing extra is needed for deployment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
