BoYata
BoYata IMX415 Camera 2 in 1 accessory
4K IMX415 camera module connects via MIPI CSI to Radxa single-board computers
- IMX415 sensor captures detailed 4K video
- MIPI CSI interface connects directly to Radxa SBCs
- Designed for Radxa single-board computers
- Compact 2-in-1 accessory adds camera capability
- New condition ensures reliable performance out of the box
IMX415 camera module for Radxa SBCs
The BoYata IMX415 Camera is a 2-in-1 accessory built around the IMX 415 sensor. It connects through a MIPI CSI interface and is validated for Radxa single-board computers. Developers and hobbyists working on embedded vision projects can integrate it directly without extra driver work. The module targets users who need a ready-to-use camera block for prototyping or deployment on supported Radxa boards.
Passive thermals and low power draw
The camera draws power from the host board through the MIPI CSI link and has no active cooling. In normal operation it runs silently and adds negligible load to the SBC power budget. No fan or heatsink is required, keeping the assembly compact for space-constrained builds. Thermal behaviour follows the host board's own dissipation limits.
IMX 415 sensor via MIPI CSI
The single specification that decides fit is the IMX 415 sensor paired with a MIPI CSI interface on Radxa SBCs. If your board lacks a compatible CSI port or driver support for this sensor, the module will not function. Buyers who need a different sensor resolution, a USB interface, or support for non-Radxa platforms should look elsewhere.
Highlights
- IMX415 sensor captures detailed 4K video
- MIPI CSI interface connects directly to Radxa SBCs
- Designed for Radxa single-board computers
- Compact 2-in-1 accessory adds camera capability
- New condition ensures reliable performance out of the box
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the IMX415 camera to a Radxa SBC and what step is often missed?
Plug the MIPI CSI ribbon into the board's camera port with the contacts facing the correct direction, then enable the camera interface in the OS before testing.
What part of the IMX415 camera module is most likely to need replacement after extended use?
The flexible MIPI CSI ribbon cable can fatigue from repeated bending or vibration, so inspect it if the image drops out.
What thermal limit appears first when the IMX415 sensor runs 4K capture continuously?
The sensor's own temperature ceiling triggers throttling or shutdown before the Radxa board reaches its limits.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
