BoYata
BoYata 2 in 1 accessory Savage Flat Back Medium Action 20 MOA
A Picatinny scope mount machined from 6061 aluminium with 20 MOA cant, 4.09 inch centre spread and 7.064 inch length for Savage flat-back medium actions
- Machined from domestic 6061-T6 aluminum for lightweight strength
- 20 MOA cant built in for long-range elevation adjustment
- Full-length Picatinny cross slots allow flexible ring placement
- 09" center spread fits Savage flat-back medium actions
- Hex head screws and wrench included for secure installation
Scope mount for Savage flat-back medium action
This one-piece Picatinny rail is machined from domestic 6061 T6 aluminium with a matte black finish. It fits older Savage medium-action rifles that lack the AccuTrigger system and provides a 20 MOA cant for long-range elevation adjustment. The centre-to-centre hole spacing is 4.09 inches and overall length is 7.064 inches.
Supplied hex hardware and full-length cross slots
Hex head screws and the matching wrench are included so no separate tool purchase is required. Picatinny cross slots run the entire 7.064-inch rail, allowing flexible positioning of scope rings or other accessories. The central channel reduces mass to roughly 2-3 oz and often leaves factory iron sights unobstructed.
Verify action type and hole spacing before ordering
Confirm your rifle is a Savage flat-back medium action without AccuTrigger, as this mount will not fit short or long actions or AccuTrigger models. Measure the receiver to ensure the middle hole centres are exactly 4.09 inches apart. Custom silver anodising is available at extra cost with a three-month lead time.
Highlights
- Machined from domestic 6061-T6 aluminum for lightweight strength
- 20 MOA cant built in for long-range elevation adjustment
- Full-length Picatinny cross slots allow flexible ring placement
- 09" center spread fits Savage flat-back medium actions
- Hex head screws and wrench included for secure installation
Specifications
No published specifications for this item yet.
Questions about this item
Will the 6061-T6 aluminium rail need any protective coating over time?
The matte black finish on the 6061-T6 aluminium resists corrosion under normal field use; no additional coating is required unless the anodising is scratched through to bare metal.
What stops the hex-head screws from loosening during repeated recoil?
The supplied hex-head screws engage the receiver threads directly; applying a removable thread-locker at installation is the standard way to maintain clamp force under sustained firing.
Does the 7.064" rail become too hot to touch after extended shooting sessions?
Aluminium dissipates heat quickly; the rail warms with the barrel but remains safe to handle during typical all-day use.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
