BoYata
BoYata 2 in 1 Accessories 2 Pack Gigabit LC Fiber to Ethernet Media Converter 850nm 550m
Two-port kit converts 850 nm LC multimode fibre to Gigabit RJ-45 copper up to 550 m with plug-and-play auto-negotiation
- Converts 1000BASE-SX LC fiber to 10/100/1000Base-T RJ45 copper
- Extends network links up to 550 metres over OM3/OM4 multimode fibre
- Works immediately with no software or configuration needed
- Auto-negotiates 10/100/1000 Mbps with MDI/MDIX crossover support
- Includes two converters, two SFP modules and two power supplies
Media Converter Kit
This BoYata 2 in 1 Accessories kit provides two Gigabit media converters that translate 1000Base-SX LC fiber to 10/100/1000Base-TX copper Ethernet. Each unit includes a pre-installed 850 nm SFP module and a dedicated power supply for immediate deployment.
Network Extension Fit
The package suits installers who need to bridge multimode fiber runs up to 550 m or 1804 ft using OM3 or OM4 duplex cabling. Buyers requiring single-mode fiber support, longer reach, or different wavelengths must choose a different converter.
850 nm Multimode Wavelength
The included SFP modules operate at 850 nm over multimode fiber, which determines the 550 m distance limit and OM3/OM4 cable compatibility. Verify that your existing fiber plant matches this wavelength and mode before purchasing.
Highlights
- Converts 1000BASE-SX LC fiber to 10/100/1000Base-T RJ45 copper
- Extends network links up to 550 metres over OM3/OM4 multimode fibre
- Works immediately with no software or configuration needed
- Auto-negotiates 10/100/1000 Mbps with MDI/MDIX crossover support
- Includes two converters, two SFP modules and two power supplies
Specifications
No published specifications for this item yet.
Questions about this item
How much power does each media converter draw when running continuously?
The kit includes two external power supplies, one for each converter, so each unit draws whatever its supplied adapter provides without needing an extra power source.
What cabling and patch panels must I already have to use the LC duplex connectors?
You need OM3 or OM4 multimode duplex fibre patch cords with LC connectors on both ends to link the two converters up to 550 metres.
Will the 10/100/1000 Mbps RJ45 ports auto-negotiate with my older 100 Mbps switches?
Yes, the RJ45 ports support 10/100/1000 Mbps auto-negotiation and Auto-MDI/MDIX, so they will link at the highest common speed with legacy Fast Ethernet gear.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
