BONAEVER
BONAEVER WiFi Extender 1200Mbps 6000 Sq.ft 35 Devices Dual Band 2.4/5.8GHz
Dual-band Wi-Fi extender delivers 1200 Mbps across 6000 sq ft for 35 devices and includes an Ethernet port
- Case TypeProtection Case
- Dual-band 2.4/5.8 GHz reduces interference for smoother streaming
- 1200 Mbps total rate supports HD video and gaming without lag
- Covers 6000 sq ft to eliminate dead zones indoors and outdoors
- Connects up to 35 devices simultaneously for whole-home connectivity
- Ethernet port adds wired stability for consoles, PCs or smart TVs
BONAEVER WiFi Extender 1200Mbps dual-band booster
This BONAEVER WiFi extender delivers dual-band 2.4/5.8GHz wireless coverage up to 6000 Sq.ft for 35 devices. It operates as a repeater, router or access point with an Ethernet port for wired connections. The unit suits homes with dead zones or outdoor areas needing stronger signal.
Check router band compatibility and outlet placement
Verify your existing router broadcasts on 2.4GHz and 5.8GHz bands to match the extender. Ensure a mains socket exists halfway between the router and the weak-coverage area for optimal relay performance. Confirm the Ethernet port meets any wired-device needs you have.
Replaces single-band repeaters or dead-zone gaps
Upgrading from a single-band repeater adds 5.8GHz capacity and higher aggregate throughput for HD video and gaming. The jump is worthwhile when your current hardware cannot cover 6000 Sq.ft or support 35 simultaneous connections. Buyers needing mesh roaming or tri-band speeds should consider other solutions.
Highlights
- Dual-band 2.4/5.8 GHz reduces interference for smoother streaming
- 1200 Mbps total rate supports HD video and gaming without lag
- Covers 6000 sq ft to eliminate dead zones indoors and outdoors
- Connects up to 35 devices simultaneously for whole-home connectivity
- Ethernet port adds wired stability for consoles, PCs or smart TVs
Specifications
| Case Type | Protection Case |
|---|
Questions about this item
What comes in the box with the BONAEVER WiFi extender and do I need to buy anything else?
The extender itself ships with four 3 dBi omni-directional antennas and an Ethernet port for wired backhaul or client connections; no extra antennas or cables are required for basic operation.
Should I choose the 2.4 GHz or 5.8 GHz band for my setup?
Both bands run simultaneously — 2.4 GHz reaches farther through walls while 5.8 GHz delivers higher throughput for nearby devices; the extender aggregates them for a combined 1200 Mbps link rate.
What does the 1200 Mbps figure mean once the extender is installed in my home?
It is the maximum combined wireless link rate across both bands under ideal conditions; real-world throughput will be lower and depends on distance, obstacles and the number of connected devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



