BONAEVER
BONAEVER LED Strip Lights 32.8ft 300 LED 5050 RGB 44 Key Remote Kit Bag
Waterproof 32.8 ft RGB LED strip with 300 5050 chips, 44-key IR remote, 20 colours and 8 lighting modes
- Case TypeProtection Case
- 8 ft LED strip covers large areas with 300 bright 5050 RGB LEDs
- 44-key IR remote gives 20 colours and 8 dynamic lighting modes
- Cuttable every 3 LEDs for custom lengths on desks beds or TVs
- Strong 3M adhesive holds firmly on walls cabinets cars and more
- IP20 rated for safe indoor decoration in living rooms kitchens parties
LED Strip Kit 32.8ft 300 LEDs
This 32.8ft LED strip kit contains 300 individual 5050 RGB LEDs and ships with a 44-key IR remote controller and power supply. It is designed for indoor decorative lighting on surfaces such as desks, beds, TVs and cabinets. The self-adhesive backing uses a strong 3M formulation for reliable mounting. Buyers needing waterproof outdoor runs or integrated smart-home control should look elsewhere.
Cuttable 5050 RGB Tape Light
The strip can be cut every three LEDs along the marked cutting lines, allowing the length to be tailored to specific furniture or perimeter dimensions. Ultra-bright 5050 chips deliver vivid colour output across the full run. The IP20 rating means the tape is not protected against water ingress, so sustained exposure to moisture will cause failure.
44-Key IR Remote Control
A 44-key infrared remote provides direct access to 20 colours and eight lighting patterns including flash, fade and jump modes. Brightness and RGB levels are adjustable from the handset. The system requires line-of-sight to the receiver, so installations behind solid panels or around tight corners may lose reliable control.
Highlights
- 8 ft LED strip covers large areas with 300 bright 5050 RGB LEDs
- 44-key IR remote gives 20 colours and 8 dynamic lighting modes
- Cuttable every 3 LEDs for custom lengths on desks beds or TVs
- Strong 3M adhesive holds firmly on walls cabinets cars and more
- IP20 rated for safe indoor decoration in living rooms kitchens parties
Specifications
| Case Type | Protection Case |
|---|
Questions about this item
How much power does the 32.8ft 300 LED 5050 strip draw when running all day?
The kit includes a power supply matched to the 5050 RGB strip. Power draw depends on the brightness level and colour mode selected via the 44-key remote.
What surface preparation or extra parts are needed before the 3M adhesive will hold the strip?
Clean the mounting area so it is dry, smooth and free of dust. The strip uses a strong 3M adhesive backing; no additional fasteners are required for most indoor surfaces.
Can I mix the 12-metre RGB strips with older single-colour LED tape using the same remote?
The 44-key IR remote controls only this 5050 RGB kit. Older single-colour tapes need their own controller and cannot share the remote or power supply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



