We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal PoE switch with eight PoE ports and two uplink ports on a rectangular desktop case

BONAEVER

BONAEVER 10-Port PoE Switch Gigabit 120W 802.3at/af 8xPoE 2xUplink

SKU CH-0QPZ-VV5P1

Supplies power and data to eight PoE devices at up to 30 W each through a single Cat-5 cable

  • Case TypeProtection Case
  • 10-port PoE switch powers cameras and phones from one cable
  • 8 PoE ports each deliver up to 30 W for flexible device placement
  • 120 W total budget supports multiple devices simultaneously
  • Two gigabit uplink ports handle 1000 Mbps backbone traffic
  • Auto-sensing IEEE 802.3af/at detects needs and extends reach to 250 m

10-Port PoE Switch for IP devices

The BONAEVER 10-Port PoE Switch delivers power and data over a single Cat-5 cable to IP cameras, wireless access points, VoIP phones and access-control systems. Eight PoE ports supply up to 30 W each while two Gigabit uplink ports handle backbone traffic. The unmanaged metal chassis fits on a desktop and requires no configuration.

Low heat design with 120 W budget

A 52 V 2.8 A internal supply caps total output at 120 W across all ports. The metal enclosure acts as a passive heatsink, keeping the unit cool and silent during normal operation. Auto-sensing negotiates speed, duplex and cable type on every link without fan noise.

Sustained 100 m runs with 250 m extension

Each port maintains a reliable 100 m transmission distance at full power. An extend function pushes reach to 250 m for longer cable runs while preserving IEEE 802.3af/at compliance. The switch continuously monitors per-port demand and allocates power within the fixed 120 W envelope without overload trips.

Highlights

  • 10-port PoE switch powers cameras and phones from one cable
  • 8 PoE ports each deliver up to 30 W for flexible device placement
  • 120 W total budget supports multiple devices simultaneously
  • Two gigabit uplink ports handle 1000 Mbps backbone traffic
  • Auto-sensing IEEE 802.3af/at detects needs and extends reach to 250 m

Specifications

Case TypeProtection Case

Questions about this item

How do I install the PS-1010GB switch on a desktop and which uplink port should I use for the router?

Place the metal case on a flat surface, connect the router to either 10/100/1000 Mbps uplink port using Cat5 cable, then plug up to eight PoE devices into the 10/100 Mbps ports; the switch auto-negotiates speed and PoE requirements.

What maintenance will the PS-1010GB need over time?

The fanless metal chassis relies on passive cooling; keep ventilation slots clear of dust and verify the 52 V 2.8 A power adapter remains seated, as the 120 W budget is the only replaceable component.

What limit appears first when all eight PoE ports run continuously at full load?

The 120 W total power budget is reached before any port hits its 30 W ceiling, so the switch will prioritise or shut down ports once the combined draw exceeds 120 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.