Bon Tool Co.
Bon Tool Co. 24-124 Screed 14 Foot Reinforced H Aluminum Tool Storage
Holds a 14-foot reinforced H aluminium screed for concrete finishing work
- 14-foot length covers large pours efficiently
- Reinforced H-profile resists bending under wet concrete
- 3/4-inch by 4-inch cross-section balances rigidity and weight
- Aluminum construction prevents rust on job sites
- Bon Tool 24-124 model built for professional screeding work
14-Foot Reinforced Aluminium Screed
The Bon Tool 24-124 is a 14-foot straightedge designed for striking off and levelling fresh concrete. Its reinforced H-profile aluminium construction provides rigidity across the full length while remaining light enough for one person to handle on typical slab and pavement jobs.
Practical limits of a 14-foot hand screed
A single operator can effectively control this length on pours up to roughly the tool’s span, but wider bays require a second worker or a mechanical screed. The 3/4-inch by 4-inch section resists moderate bowing, yet very stiff or low-slump mixes will demand more downward force than the aluminium edge can comfortably transmit without deflection.
Check your setup before ordering
Confirm that the work area allows a clear 14-foot reach without obstructions and that the subgrade or forms are set to the correct elevation for a single pass. Ensure the crew can manoeuvre the full length through doorways or around reinforcement, and verify that the aluminium edge is compatible with any surface-hardening treatments specified for the project.
Highlights
- 14-foot length covers large pours efficiently
- Reinforced H-profile resists bending under wet concrete
- 3/4-inch by 4-inch cross-section balances rigidity and weight
- Aluminum construction prevents rust on job sites
- Bon Tool 24-124 model built for professional screeding work
Specifications
| Brand | BON TOOL |
|---|
Questions about this item
How do I decide which Bon 24-124 screed length suits my pour?
The 14-foot span covers wide bays in a single pass, reducing joints and labour on large slabs.
What does the reinforced H-profile do when the screed is loaded with concrete?
The H-shape stiffens the 3/4-inch by 4-inch aluminium so it resists bowing under wet mix weight.
Will the straight aluminium edge work with a vibrating screed motor?
The plain reinforced H-bar has no motor mount; it is designed for manual strike-off only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
