Bolton Technical
Bolton Technical AD9363 2 in 1 accessory with 4 antennas
A ready-to-use SDR accessory supporting 2TX and 2RX with four antennas included
- Supports 2TX and 2RX operation
- AD9363 ADC/DAC chipset included
- Four antennas supplied for signal reception
- Assembled and ready to use immediately
Bolton Technical AD9363 2 in 1 Accessory
The Bolton Technical AD9363 is a 2 in 1 accessory designed for software-defined radio experimentation. It uses the AD9363 transceiver to provide two transmit and two receive channels. The unit arrives assembled and ready to operate with four included antennas and a USB cable. An SD card is not included and must be supplied separately.
Four Antennas for 2TX 2RX Operation
The four antennas support simultaneous dual-transmit and dual-receive operation, giving headroom for MIMO and diversity configurations. Bandwidth and frequency coverage are determined by the AD9363 transceiver and the host software environment. Users needing more than two spatial streams or integrated storage will find this kit does not meet those requirements.
Highlights
- Supports 2TX and 2RX operation
- AD9363 ADC/DAC chipset included
- Four antennas supplied for signal reception
- Assembled and ready to use immediately
Specifications
No published specifications for this item yet.
Questions about this item
Will the AD9363 accessory work with my existing laptop that only has USB 2.0 ports?
The included USB cable connects the SDR to any standard USB port; the device is assembled and ready to use once plugged in.
How can I verify the AD9363 is operating correctly after I connect the four antennas?
With the SDR powered via USB and antennas attached, open your SDR software — if the spectrum display shows signals across the expected range, the 2TX/2RX chains are active.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
