Bolton Technical
Bolton Technical 2 in 1 accessory 4 pieces 75 inch TV 75Q60A QN75Q60AAFXZA QN75Q70AAFXZA
Four 16.14 in LED backlight strips with 48 beads each at 3V restore screen lighting on compatible 75-inch TVs
- Restores screen brightness with four matching LED strips
- Each 16.14 in strip carries 48 beads at 3V
- Pre-applied adhesive backing enables direct panel mounting
- Fixed-length design prevents cutting errors during replacement
- Compatible with 75Q60A QN75Q60AAFXZA QN75Q70AAFXZA models
4-piece LED backlight kit for 75-inch Q60A
This set contains four direct-replacement LED strips built for compatible 75-inch Samsung models including the 75Q60A, QN75Q60AAFXZA and QN75Q70AAFXZA. Each strip measures 16.14 inches and carries 48 beads operating at 3 volts per bead. The strips arrive new with double-sided adhesive already applied for straightforward installation.
Fits the original light-bar cavity without cutting
The fixed-length strips slot into the same mounting positions as the factory panels, so no trimming or re-wiring is required. Double-sided adhesive on the back secures each piece firmly once aligned. Because the layout mirrors the original design, the repair restores uniform illumination across the panel without adding extra components or modifying the chassis.
Replaces aged or failed factory strips on listed
When the original backlight develops dark bands, flicker or complete loss of output, this kit restores even lighting without swapping the entire panel. The upgrade is worthwhile when the TV powers on but shows uneven brightness and the part numbers match BN96-52601A or LM41-01054A. It does not suit sets with different strip lengths, bead counts or connector layouts.
Highlights
- Restores screen brightness with four matching LED strips
- Each 16.14 in strip carries 48 beads at 3V
- Pre-applied adhesive backing enables direct panel mounting
- Fixed-length design prevents cutting errors during replacement
- Compatible with 75Q60A QN75Q60AAFXZA QN75Q70AAFXZA models
Specifications
No published specifications for this item yet.
Questions about this item
How long is each LED strip in the 4-piece set for the 75Q60A?
Each strip measures 16.14 in and cannot be cut; the kit contains four strips with double-sided adhesive backing for direct mounting.
What voltage does each LED bead on the BN96-52601A strips draw during continuous operation?
Every bead runs at 3 V, so the 48 beads per strip operate at low voltage with minimal heat build-up during all-day use.
Which original TV panel part numbers must match the strips shown in the product photos before ordering?
Confirm the original panel uses BN96-52601A or LM41-01054A and that the strip length, LED spacing and 48-bead count match the four strips supplied.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
