We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bodine

Bodine BSL310 LED Emergency Driver 10.4W 90min

SKU CH-0ZT3-GAQ8X

Provides 90 minutes of emergency LED illumination at 10.4 watts with 120 to 277V AC input

  • MaterialHAWA
  • 4 W LED emergency driver provides 90 min backup illumination
  • CA Title 20 compliant for regulated installations
  • 120 to 277 V AC input suits standard commercial circuits
  • Compact 14 1/2 in × 2 1/4 in × 1 3/16 in profile fits tight spaces
  • Polycarbonate housing protects internal components in facility environments

Emergency LED Driver 10.4W

The Bodine BSL310 is an LED emergency driver rated at 10.4 watts. It accepts an input voltage of 120 to 277 volts AC and supports a single LED bulb. The unit provides 90 minutes of emergency illumination and meets CA Title 20 compliance standards.

Replaces Standard Ballast for Code Compliance

This driver replaces a standard lighting ballast to add battery-backed emergency operation to an existing fixture. The upgrade is worth it when building codes require 90 minutes of egress lighting during a power outage. It fits fixtures that can accommodate its standard profile dimensions of 14 1/2 inches in length, 2 1/4 inches in width and 1 3/16 inches in height.

Limited to Single 10.4W LED Load

The practical limit of this driver is its single-channel output capped at 10.4 watts maximum. It cannot drive multiple bulbs or loads exceeding that wattage. The polycarbonate housing is designed for indoor installation within compatible fixture enclosures. Fixture-dependent initial lumens mean actual brightness varies with the specific LED module used.

Highlights

  • 4 W LED emergency driver provides 90 min backup illumination
  • CA Title 20 compliant for regulated installations
  • 120 to 277 V AC input suits standard commercial circuits
  • Compact 14 1/2 in × 2 1/4 in × 1 3/16 in profile fits tight spaces
  • Polycarbonate housing protects internal components in facility environments

Specifications

BrandBODINE
MaterialHAWA

Questions about this item

Will the 14 1/2 in by 2 1/4 in housing fit inside my existing fixture?

The driver measures 14 1/2 inches long, 2 1/4 inches wide and 1 3/16 inches high, so verify your fixture cavity has at least that clearance.

How do I wire the 120 to 277V AC input and the single LED load correctly?

Connect the AC supply leads to the driver’s input terminals, then wire one LED module up to 10.4 W to the output; the common error is reversing the polarity on the LED side.

When should I replace the internal battery to keep the 90 min emergency run time?

Run the monthly test; if the lamp cannot sustain output for the full 90 minutes, the battery pack needs replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.