We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bluecctv

Bluecctv analog HD video balun cat5 to BNC converter

SKU CH-VQY6-X6T12

Transmits analog HD video over a single CAT5 pair up to 250 metres for 720p and 1080p signals without external power

  • Transmits 720p or 1080p video up to 250 metres over a single CAT5 pair
  • Passive design needs no power supply for simple point-to-point installation
  • Built-in transient protection guards equipment against voltage spikes
  • Press-in terminals accept 24-16 AWG wire for quick, tool-free connections
  • Operates reliably from -10 °C to +50 °C in up to 95 % humidity

Passive video balun for analog HD

This passive video balun converts analog HD TVI AHD CVI signals between BNC and a single unshielded twisted pair. It requires no external power supply and installs with press-in terminals. The unit supports 24 to 16 AWG wire and fits point-to-point CCTV runs.

Thermal and power profile

The device operates from minus ten to fifty degrees Celsius in humidity up to ninety five percent. As a passive component it draws no power and generates no heat or noise. DC loop resistance is fifty two ohms per one thousand feet or eighteen ohms per one hundred metres.

Build quality and daily use

The compact housing measures thirty six by sixteen by nineteen millimetres and weighs eighteen grams. Built-in transient protection guards against surges while super interference rejection keeps the signal clean. Transmission reaches two hundred fifty metres at seven twenty p or ten eighty p without crosstalk.

Highlights

  • Transmits 720p or 1080p video up to 250 metres over a single CAT5 pair
  • Passive design needs no power supply for simple point-to-point installation
  • Built-in transient protection guards equipment against voltage spikes
  • Press-in terminals accept 24-16 AWG wire for quick, tool-free connections
  • Operates reliably from -10 °C to +50 °C in up to 95 % humidity

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the UTP wires to the press-in terminals without soldering?

Strip each conductor, insert the bare wire into the press-in terminal, and press down firmly; the spring-loaded clamp grips 24-16AWG (0.5-1.31mm) solid or stranded wire without tools.

Will the built-in transient protection need replacement after a surge event?

The transient protection is a non-replaceable component designed to absorb voltage spikes; if a severe surge occurs the entire balun should be replaced.

At what distance does 1080p video quality start to degrade over CAT5?

1080p transmission is rated up to 250 metres; beyond that distance signal attenuation and DC loop resistance of 52 ohms per 1,000 ft can reduce image quality.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.