We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bluecctv 7 inch HD-TVI test monitor with 18650 battery and 12V output

Bluecctv

Bluecctv 7" HD-TVI CCTV Test Monitor 12V 18650

SKU CH-SG76-G2KXW

A portable 7-inch LCD tester handles 1080P HD-TVI, CVBS, HDMI and VGA signals while its 18650 battery and 12V output power cameras on site

  • 7" LCD shows 1080P@30fps for clear camera testing
  • 4-in-1 input handles HD-TVI CVBS HDMI VGA signals
  • 12V 2A output powers cameras during installation checks
  • 18650 Li-ion battery enables fully portable field use
  • PAL NTSC auto OSD simplifies on-screen configuration

Purpose-built HD-TVI test monitor

This 7-inch portable tester targets installers and technicians who commission and troubleshoot HD-TVI and analog CCTV systems. It combines a colour TFT LCD screen with a built-in 18650 lithium-ion battery for on-site use without mains power. The unit also provides a 12V/2A output to energise a camera during alignment. It is not suited for installers who need IP-camera discovery tools or network diagnostics.

1080P HD-TVI and multi-format input headroom

The monitor accepts HD-TVI signals up to 1920x1080 at 30fps plus CVBS, VGA and HDMI sources through a 4-in-1 interface. Coaxial control protocol support lets you adjust camera OSD menus over the video cable. The display tops out at 1080P resolution, so it cannot preview 4MP or 4K analog-HD formats. Users requiring higher-resolution camera verification will need a different tester.

Battery-powered field kit with camera supply

An integrated 18650 cell enables untethered operation while the 12V/2A output powers a connected camera directly from the tester. PAL/NTSC auto-switching and an on-screen colour bar generator simplify signal checks. The multi-function connector panel consolidates HD-TVI, CVBS, VGA and HDMI in one housing, reducing cable clutter on ladder work. There is no rack-mount provision or ruggedised chassis rating.

Highlights

  • 7" LCD shows 1080P@30fps for clear camera testing
  • 4-in-1 input handles HD-TVI CVBS HDMI VGA signals
  • 12V 2A output powers cameras during installation checks
  • 18650 Li-ion battery enables fully portable field use
  • PAL NTSC auto OSD simplifies on-screen configuration

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 V 2 A output run my older analogue camera while I'm testing with the monitor?

Yes, the built-in 12 V 2 A power output can supply an analogue camera directly from the tester so you can verify the camera before final installation.

How can I confirm the HD-TVI signal is displaying at the correct 1920 x 1080 resolution after connecting a camera?

Open the on-screen display menu; it will show the detected resolution and frame rate, letting you verify 1080P at 30 fps on the 7 inch LCD.

Does the package include the 18650 battery and the charger, or must I buy them separately?

The 18650 lithium-ion battery is supplied inside the unit; a mains power adapter for charging is also included so no separate purchase is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.