We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
4 inch 316 stainless steel pipe 9-13/16 inches long push-fit EPDM seal

Blucher

Blucher P4-0.8-316 4 in x 9-13/16 in 316 Stainless Steel Pipe

SKU CH-FT13-S83MH

Push-fit 316 stainless steel pipe with EPDM seal handles non-potable water up to 29 psi at 212 °F

  • 316 stainless steel resists chemicals and corrosion
  • Push-fit design enables fast installation without tools
  • Seamless construction ensures leak-free gravity flow
  • Withstands 29 psi at 212 degrees F
  • Operates reliably from 32 to 212 degrees F

Push-Fit Stainless Pipe for Gravity Drainage

This 316 stainless steel pipe uses a push-fit joint and an EPDM seal for non-potable water systems. It handles gravity flow without soldering or threading tools. The seamless construction resists chemicals and corrosion across a wide temperature range. It is built for straightforward installation in commercial or industrial drainage layouts.

Pressure and Temperature Limits of the Push-Fit

The push-fit connection is rated to 29 psi at 212 degrees Fahrenheit. Operating temperatures must stay between 32 and 212 degrees Fahrenheit. Exceeding the pressure rating or the temperature ceiling can compromise the EPDM seal and cause leaks. Designers must size the system so that gravity head never pushes the joint past 29 psi.

Replaces Threaded or Welded 316 Stainless Sections

This pipe replaces rigid threaded or welded 316 stainless runs where faster assembly and easier modification are needed. The jump is worth it when crews must reconfigure drainage lines frequently or work in tight spaces where welding is impractical. It is not for potable water circuits or for pressurised mains above the stated rating.

Highlights

  • 316 stainless steel resists chemicals and corrosion
  • Push-fit design enables fast installation without tools
  • Seamless construction ensures leak-free gravity flow
  • Withstands 29 psi at 212 degrees F
  • Operates reliably from 32 to 212 degrees F

Specifications

BrandBLUCHER

Questions about this item

Should I choose the 4-inch nominal size or a different diameter for my gravity-flow system?

This pipe has a 4-inch nominal size with a 3 31/32-inch inside diameter, making it suited for gravity-flow applications where that bore matches your existing fittings.

What does the 29 psi @ 212 °F rating mean when the pipe is installed in a hot-water return line?

At the maximum operating temperature of 212 °F the pipe is rated for 29 psi; at lower temperatures the allowable pressure will be higher, so a hot-water return line staying below 212 °F remains within the rated limit.

How does the push-fit joint with the EPDM seal perform on a 316 stainless pipe carrying chemical-resistant flow?

The push-fit connection uses an EPDM seal that is compatible with the pipe's chemical-resistant 316 stainless steel, allowing tool-free assembly while maintaining corrosion and high-temperature resistance up to 212 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.