We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight two inch stainless pipe with push-fit ends and visible seal ring

Blucher

Blucher P2-0.8-316 2" x 9-13/16" 316 Stainless Steel Pipe

SKU CH-S2PP-PS3YK

A 316 stainless steel pipe with push-fit connection for non-potable gravity flow, resisting chemicals, corrosion and temperatures from 32 to 212 °F at 29 psi

  • 316 stainless steel resists chemicals and corrosion
  • Push-fit design installs without tools or welding
  • Handles up to 29 psi at 212 °F
  • Seamless construction ensures leak-free gravity flow
  • Operates reliably from 32 °F to 212 °F

Blucher 2-Inch 316 Stainless Push-Fit Pipe

This 2-inch nominal pipe is made from seamless 316 stainless steel with an EPDM seal for chemical and corrosion resistance. The push-fit design allows quick assembly without welding or threading tools. It handles non-potable water in gravity-flow systems at up to 29 psi and 212 degrees Fahrenheit. The overall length is 9-13/16 inches with a 1-31/32 inch inside diameter.

Suited for Industrial Drain and Process Lines

Installers working on chemical-resistant drain, vent or low-pressure process piping will benefit from the seamless 316 construction and tool-free joints. The pipe is not intended for potable water supply or for systems that operate above 29 psi at 212 degrees Fahrenheit. Applications requiring threaded, flanged or welded connections should consider alternative joining methods. Buyers needing longer straight runs must join multiple sections.

29 PSI Maximum Pressure at 212°F Decides Fit

The single limit that determines whether this pipe works in your system is the 29 psi maximum operating pressure at the 212-degree Fahrenheit upper temperature rating. If your design pressure or temperature exceeds these values, the pipe is not suitable regardless of its corrosion resistance.

Highlights

  • 316 stainless steel resists chemicals and corrosion
  • Push-fit design installs without tools or welding
  • Handles up to 29 psi at 212 °F
  • Seamless construction ensures leak-free gravity flow
  • Operates reliably from 32 °F to 212 °F

Specifications

BrandBLUCHER

Questions about this item

Will the 2 in nominal pipe size and 2 in outside diameter match my existing 2 in stainless lines without adapters?

Yes, the 2 in nominal pipe size and 2 in outside diameter are standard dimensions for 2 in stainless piping systems, so the pipe connects directly to matching fittings.

How can I confirm the push-fit EPDM seal is seated correctly after installation?

After pushing the pipe fully into the fitting, pull back firmly; the pipe should not move and the EPDM seal ring should be visible and evenly seated around the circumference.

Does the box include the push-fit fittings or only the 9-13/16 in pipe section?

The package contains the 316 stainless steel pipe section only; push-fit fittings and any required lubricant must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.