Blazing Memory
Blazing Memory BM16G2KIT1333S 16GB 2x8GB DDR3 1333MHz SO-DIMM accessory
16 GB dual-channel DDR3 SO-DIMM kit with two 8 GB modules running at 1333 MHz CL11 and 1.35 V or 1.5 V for laptops
- 16 GB total capacity for smoother multitasking with two 8 GB modules
- Low 1.35 V operation cuts power draw and heat in laptops
- CL11 latency at 1333 MHz delivers responsive DDR3 performance
- 204-pin SO-DIMM form factor fits standard DDR3 laptop slots
- Backward compatible to 1066 MHz for broader system support
16 GB DDR3 SO-DIMM kit
This kit provides two 8 GB DDR3 SO-DIMM modules for a total of 16 GB. It is built for laptops that accept 204-pin DDR3 memory running at 1333 MHz. The low-voltage design operates at 1.35 V or 1.5 V with CL11 latency.
Capacity and headroom at 1333 MHz
The 16 GB total suits everyday multitasking and typical productivity workloads on compatible notebooks. Memory-intensive tasks such as large video projects or virtual machines may exceed the available headroom. The kit is backward compatible to 1066 MHz (PC3-8500) if the system requires a lower speed.
Upgrade from lower-capacity DDR3
Replacing a 4 GB or 8 GB DDR3 configuration with this dual-channel kit doubles usable memory for smoother performance. The jump is worthwhile when the laptop supports two SO-DIMM slots and the chipset recognises 8 GB modules. Systems limited to 1066 MHz or single-channel layouts will not gain the full bandwidth benefit.
Highlights
- 16 GB total capacity for smoother multitasking with two 8 GB modules
- Low 1.35 V operation cuts power draw and heat in laptops
- CL11 latency at 1333 MHz delivers responsive DDR3 performance
- 204-pin SO-DIMM form factor fits standard DDR3 laptop slots
- Backward compatible to 1066 MHz for broader system support
Specifications
No published specifications for this item yet.
Questions about this item
Will this 1333 MHz DDR3 kit run in my older laptop that only supports 1066 MHz memory?
Yes, the kit is backward compatible to 1066 MHz PC3-8500 speeds and will automatically down-clock in systems that only support the lower frequency.
How can I verify the kit is running in dual-channel mode after installation?
Check the BIOS or a system-information tool such as CPU-Z; it should report 16 GB total capacity at 1333 MT/s with CL11 timings in dual-channel configuration.
Does the package include only the two SO-DIMM modules or are any tools or adapters supplied?
Only the two 8 GB 204-pin DDR3 SO-DIMM modules are included, packed in anti-static bags; no tools, brackets or adapters are provided.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



