BLACKHORSE-RACING ER9801 7 inch 12V 80W 800 CFM 2900 RPM industrial cooling fan
A 7 inch reversible 12 V fan moves 800 CFM at 2900 RPM with a slim 2.64 inch profile for tight engine bays
- High airflow of 800 CFM from 10 blades
- Slim 2.64-inch profile frees engine bay space
- Reversible push-pull operation suits puller or pusher roles
- Universal 12V 80W fit for radiators, oil coolers, condensers
- 2900 RPM performance with included mount brackets and tie straps
Universal slim 7 inch radiator fan
This reversible 12 volt electric fan mounts as a pusher or puller on radiators, oil coolers and transmission coolers. The slim 2.64 inch profile clears tight engine bays while the supplied brackets and tie straps secure the unit without modification. Ten curved blades move up to 800 CFM at 2900 RPM for auxiliary engine-bay cooling.
Airflow capacity and electrical draw
At 800 CFM the fan supplies strong supplemental airflow for typical passenger-car radiators and intercoolers. The motor draws approximately 5 amps at 12 volts, so the vehicle’s charging system and wiring must handle that continuous load. Larger core radiators or high-horsepower applications may exceed the fan’s single-unit capacity.
12 volt system limits and fitment
The fan operates only on 12 volt negative-ground electrical systems and requires a relay and fuse not included in the kit. Physical fitment depends on matching the 8.27 inch overall diameter and 2.64 inch depth to the specific radiator core dimensions. Buyers needing higher static pressure or dual-fan coverage must look beyond this single-unit kit.
Highlights
- High airflow of 800 CFM from 10 blades
- Slim 2.64-inch profile frees engine bay space
- Reversible push-pull operation suits puller or pusher roles
- Universal 12V 80W fit for radiators, oil coolers, condensers
- 2900 RPM performance with included mount brackets and tie straps
Specifications
| Brand | BLACKHORSE-RACING |
|---|---|
| Part Number | ER9801 |
Questions about this item
Will the ER9801 7 inch fan fit alongside my existing radiator without clearance issues?
The slim 2.64 inch thickness and 8.27 inch overall diameter are designed for tight engine bays. Measure your radiator width and depth first, then compare to these dimensions to confirm fit.
How can I verify the ER9801 is delivering its rated 800 CFM and 2900 RPM after installation?
Use a tachometer to check the fan spins at approximately 2900 RPM and an airflow meter to measure output near 800 CFM. The 5 amp draw at 12V also confirms the 80W motor is operating correctly.
Does the ER9801 kit include the mount brackets and tie straps, or must I buy them separately?
The kit includes mount brackets and tie straps for installation. No additional mounting hardware is required unless your specific vehicle needs custom brackets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
