We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black insulated aluminium multitap connector with two hex ports

Blackburn

Blackburn AMT250 Insulated Multitap Connector 2.00 In. L 2-Port 10-250 AWG/kcmil 600V

SKU CH-FZ09-M6JKH

Two-port insulated multitap connector joins aluminium or copper conductors from 10 AWG to 250 kcmil at 600 V

  • TypeWire Connectors & Terminals
  • Insulated PVC body protects connections up to 194 °F
  • Dual-port design accepts 10 AWG to 250 kcmil aluminium or copper conductors
  • Hex-head set screws with 5/16 in drive ensure secure termination
  • Rated 600 V and certified to CSA 6591 and UL E9809 standards
  • Compact 2.00 in length fits tight panel spaces

Two-Port Insulated Multitap

The Blackburn AMT250 is a 2.00 In. L insulated multitap connector rated for 600 V and 194 Degrees F maximum operating temperature. It accepts stranded copper wire from 10 AWG up to 250 kcmil and is compatible with aluminum, copper and copper-clad aluminum conductors. The two ports are secured with a 5/16 in hex head.

PVC Insulation and Thermal Limits

The connector body is aluminum with black PVC insulation that meets CSA 6591 and UL E9809 standards. The insulation provides electrical isolation up to the rated 600 V while withstanding continuous temperatures up to 194 Degrees F. The hex-head design allows controlled torque without specialized crimping tools during normal installation.

Build Integration and Conductor Range

The 2.00 In. length fits into standard junction boxes and panel wiring gutters where a compact two-port tap is required. It bridges dissimilar conductor materials without separate transition fittings. Installers needing more than two ports or a larger wire range must select a different connector body.

Highlights

  • Insulated PVC body protects connections up to 194 °F
  • Dual-port design accepts 10 AWG to 250 kcmil aluminium or copper conductors
  • Hex-head set screws with 5/16 in drive ensure secure termination
  • Rated 600 V and certified to CSA 6591 and UL E9809 standards
  • Compact 2.00 in length fits tight panel spaces

Specifications

BrandBLACKBURN
TypeWire Connectors & Terminals

Questions about this item

How do I install the Blackburn AMT250 multitap connector and what step is often missed?

Strip each conductor to the proper length, insert fully into both ports, then tighten the 5/16 in hex screws to secure 10 AWG to 250 kcmil copper or aluminum wires.

What maintenance or replacement will this connector need over time?

Inspect the PVC insulation and aluminum body periodically for cracking, overheating signs or corrosion; replace the unit if the 194 Degrees F temperature rating is exceeded or damage appears.

What limit appears first when this connector runs under sustained load?

The 194 Degrees F maximum operating temperature is the primary limit; continuous current must stay low enough to keep the PVC insulation and aluminum body below that threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.