Black Fishing Magnet 2.5 inch 550lb Eyebolt Magnet
A 2.5 inch neodymium fishing magnet with an eyebolt for 550 lb pulling force during metal recovery
- 550 lb pulling force lifts heavy metal objects
- 5 inch CNC-machined steel base ensures durability
- Four-layer coating resists rust and scratches
- Neodymium magnetism stays permanent for repeated use
- Each unit inspected for flawless quality and strength
Heavy-Duty Retrieval Magnet
The Black Fishing Magnet is a 2.5 inch neodymium unit rated for 550 lbs of pulling force. It is built for magnet fishing, underwater metal recovery and industrial lifting tasks where permanent, high-strength magnetism is required. The CNC-machined steel base and eyebolt attachment provide a secure connection for rope or chain.
Upgrade From Weaker Magnets
This model replaces smaller or lower-rated magnets that cannot hold heavy ferrous objects in moving water or mud. The jump is worth it when you regularly target large items such as safes, bicycles or machinery parts and need a single, reliable pull without repeated attempts.
Check Rope And Mounting Points
Verify that your rope, carabiner and any mounting hardware are rated for loads well above 550 lbs to match the magnet's capacity. Ensure the eyebolt threads are fully engaged before each use and that the recovery point can handle the sudden shock load when a heavy object breaks free.
Highlights
- 550 lb pulling force lifts heavy metal objects
- 5 inch CNC-machined steel base ensures durability
- Four-layer coating resists rust and scratches
- Neodymium magnetism stays permanent for repeated use
- Each unit inspected for flawless quality and strength
Specifications
No published specifications for this item yet.
Questions about this item
What diameter clearance does the 2.5 inch magnet base need?
The magnet base is 2.5 inches wide, so allow at least that much clearance plus room for the eyebolt to rotate freely.
How do you secure the eyebolt so it will not unscrew under load?
Thread the eyebolt fully into the tapped hole and tighten firmly by hand or with a wrench; apply thread-locking compound if the magnet will see vibration or repeated shock loads.
Does the 4-layer coating ever need to be reapplied?
The coating is designed to be maintenance-free; inspect it after heavy use and touch up any deep scratches with a corrosion-resistant paint to keep rust from starting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



