We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP transceiver module, black metal body with RJ45 port and side bail latch

Black Box Corporation

Black Box Corporation LFP443 SFP Transceiver 1.25 Gb 10/100/1000 BASE-T SGMII 100 m RJ45

SKU CH-RQ9H-TBSNC MPN LFP443

SFP transceiver delivering 1.25 Gbps over copper with RJ45 connector up to 100 metres

  • Device TypeSFP (mini-GBIC)
  • 25 Gbps SFP transceiver for gigabit links
  • RJ45 copper port connects standard twisted-pair cabling
  • SGMII interface enables 10/100/1000 BASE-T operation
  • 100 m reach covers typical building runs
  • New Black Box LFP443 module ready to deploy

Copper SFP for Gigabit Ethernet

This Black Box LFP443 transceiver provides a copper RJ45 interface for 10, 100 or 1000 Mbps links over twisted pair. It uses an SGMII electrical interface and supports distances up to 100 metres. The module follows the SFP mini-GBIC form factor for hot-pluggable installation.

Suitable for RJ45 uplinks, not fibre

Network engineers extending copper connections between switches or routers will find this module fits the requirement. Installations that need single-mode or multi-mode fibre links cannot use this copper transceiver. Buyers requiring longer reach than 100 metres over copper should consider other media.

SGMII electrical interface

The device presents an SGMII host interface rather than a SerDes interface, so the host port must support SGMII for correct operation. Verify the switch or router datasheet for SGMII compatibility before purchase. This single parameter determines whether the module will link up in your equipment.

Highlights

  • 25 Gbps SFP transceiver for gigabit links
  • RJ45 copper port connects standard twisted-pair cabling
  • SGMII interface enables 10/100/1000 BASE-T operation
  • 100 m reach covers typical building runs
  • New Black Box LFP443 module ready to deploy

Specifications

BrandBlack Box
Device TypeSFP (mini-GBIC)
Shipping weight0.45 kg
Package size127 × 64 × 25 mm

Questions about this item

Will the RJ45 port on the LFP443 need replacement after extended use?

The RJ45 connector is built into the SFP module and has no user-serviceable parts; if the port fails the entire transceiver is replaced.

What limits throughput when the LFP443 runs continuously at 1.25 Gb?

The 100 m copper reach and 10/100/1000 BASE-T auto-negotiation set the practical ceiling; the SGMII host interface does not exceed 1.25 Gb.

How much heat does the LFP443 produce when powered all day?

As a passive copper SFP with no onboard laser it draws minimal power and stays cool inside a standard switch cage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.