Bipra
Bipra 40G QSFP+ IR4 2km LC SMF 2 in 1 accessory
A 40G QSFP+ IR4 transceiver delivers 40Gbps over 2km single-mode fibre with LC duplex connectors and DOM support
- 40 Gbps throughput over single-mode fibre up to 2 km
- IEEE 802.3ba 40GBASE-LR4 compliant with QSFP+ MSA
- Digital diagnostics via I2C interface for real-time monitoring
- Operates from +10 to +60 °C on 3.3 V supply
- Palo Alto Networks PAN-QSFP-40GBASE-LM4 compatible coding
40G QSFP+ IR4 Transceiver
This 40GBASE‑IR4 QSFP+ module delivers 40Gbps Ethernet over single‑mode fibre using four CWDM lanes at 1271, 1291, 1311 and 1331nm. It reaches 2km on standard G.652 SMF with duplex LC connectors and includes digital diagnostics via I2C. The unit is coded for Palo Alto Networks PAN‑QSFP‑40GBASE‑LM4 compatibility and operates from +10 to +60°C on a 3.3V supply.
Check port coding and fibre type
Verify that your switch or router accepts QSFP+ modules coded for PAN‑QSFP‑40GBASE‑LM4, as mismatched coding will prevent the link from coming up. Ensure you have duplex LC patch cables and G.652 single‑mode fibre routed for a 2km span. Confirm the host equipment provides a 3.3V power rail and can operate within the +10 to +60°C temperature window.
Hot‑plug design and DOM simplify deployment
The hot‑pluggable form factor lets you install or replace the transceiver without powering down the chassis. Built‑in digital optical monitoring reports real‑time temperature, voltage and optical power through the I2C interface, so you can verify link health remotely. No extra cables or adapters are bundled; the module ships ready for immediate use in compatible Palo Alto Networks gear.
Highlights
- 40 Gbps throughput over single-mode fibre up to 2 km
- IEEE 802.3ba 40GBASE-LR4 compliant with QSFP+ MSA
- Digital diagnostics via I2C interface for real-time monitoring
- Operates from +10 to +60 °C on 3.3 V supply
- Palo Alto Networks PAN-QSFP-40GBASE-LM4 compatible coding
Specifications
No published specifications for this item yet.
Questions about this item
Does the module ship with patch cables or must I buy duplex LC single-mode fibre separately?
The transceiver has duplex LC connectors for G.652 single-mode fibre; patch cables are not included and must be purchased separately.
Which wavelength option matches the 1310 nm CWDM4 lanes listed for this IR4 module?
The module uses four CWDM lanes at 1271, 1291, 1311 and 1331 nm centred around the 1310 nm CWDM4 grid.
What does the 2 km reach mean when the transceiver is installed in a switch running at 40 Gbps?
It supports links up to 2 kilometres over standard G.652 single-mode fibre at 40 Gbps with a 3.3 V supply and operating temperature from 10 to 60 °C.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
