We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bipra

Bipra 2 in 1 accessory 3.5mm balanced armature earpiece black pack of 2

SKU CH-HS4T-662B3

Listen-only earpieces with Kevlar-reinforced cables stretching from 45 cm to 120 cm, using balanced armature drivers for clear audio on 3.5 mm radio jacks

  • Listen-only 3.5 mm plug keeps radio hands-free
  • KEVLAR-filled cable stretches from 45 cm to 120 cm for flexible reach
  • Balanced armature driver gives clear audio in a compact earpiece
  • Works with Motorola, Kenwood, Icom, Adi, Alinco, Yaesu 3.5 mm ports
  • Suited for security, hospitality, events and noisy workplaces

3.5 mm listen-only earpiece pair

This pack contains two receive-only earpieces fitted with a 3.5 mm single-pin plug for walkie-talkies and compatible radio speaker microphones. They are built for professionals who need hands-free listening in security, hospitality, event and industrial settings. Balanced armature drivers keep the units compact and lightweight while delivering clear voice reproduction. The earpieces do not transmit audio.

Cable durability and acoustic isolation

Each cable uses Kevlar reinforcement for tensile strength and measures 45 cm at rest, extending to 120 cm when fully stretched. The coiled design reduces snag risk during movement and returns to its short length when slack is released. Passive isolation from the ear-tip seal helps users hear incoming traffic in loud venues such as nightclubs, warehouses and paintball fields. No active electronics or batteries are required.

Broad radio compatibility and hands-free operation

The 3.5 mm connector fits Motorola, Kenwood, Icom, Adi, Alinco and Yaesu radios or speaker microphones equipped with a matching audio port. Users simply plug the earpiece into the accessory jack to enable receive-only monitoring without holding the handset. The lightweight build allows extended wear over a shift, and the two-unit pack provides a spare or a second operator kit. Ensure the host device has a 3.5 mm receive jack before purchase.

Highlights

  • Listen-only 3.5 mm plug keeps radio hands-free
  • KEVLAR-filled cable stretches from 45 cm to 120 cm for flexible reach
  • Balanced armature driver gives clear audio in a compact earpiece
  • Works with Motorola, Kenwood, Icom, Adi, Alinco, Yaesu 3.5 mm ports
  • Suited for security, hospitality, events and noisy workplaces

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 3.5 mm plug to my radio without damaging the jack?

Align the single 3.5 mm pin with the radio's audio port and push straight in until it seats firmly; forcing it at an angle bends the pin and breaks the connection.

Which part of the earpiece wears out first and how often should I replace it?

The KEVLAR-reinforced cable and ear-tip see the most stress; swap the foam tip monthly in heavy use and inspect the cable for kinks every few weeks.

At what stretched length does the coiled cable stop extending and risk pulling the plug loose?

The cable reaches its maximum 120 cm when fully stretched; beyond that the tension transfers directly to the 3.5 mm plug and can unseat it.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.