Binks
Binks 98-1067 Pressure Spray Gun Kit 1.2 mm
Pressure spray gun kit with 1.2 mm nozzle, 14.3 cfm air consumption at 50 psi, and 2 qt cup capacity
- ColorTransparent
- Pressure feed delivers consistent finish
- 3 cfm at 50 psi air consumption
- 2 mm nozzle for medium-fast application
- 14 in pattern covers wide areas quickly
- Includes 6 ft air and fluid hoses
Pressure Spray Gun Kit 1.2 mm
The Binks 98-1067 is a conventional spray gun kit designed for low-to-medium viscosity coatings. It suits professional painters and automotive technicians who need a pressure-fed system for consistent fluid delivery. The 1.2 mm nozzle handles a range of materials including primers, basecoats and clearcoats. This kit includes the gun, a two-quart cup and both air and fluid hoses.
Build and connections
The gun body is transparent for easy fluid level checks. A 1/4 inch air inlet connects to the supplied six-foot air hose, while a matching six-foot fluid hose links the pressure cup to the gun. This paired hose set keeps the work area tidy and allows free movement around the workpiece. The pressure-fed cup eliminates gravity-feed limitations and supports continuous spraying at medium-to-fast delivery speeds.
Air consumption at 50 psi
The gun draws 14.3 cfm at 50 psi, so the compressor must sustain that flow during long passes. Shops with smaller compressors will see pressure drop and inconsistent atomisation. The 14-inch pattern width at the stated pressure covers panels quickly but requires adequate booth ventilation. Buyers who need a lower-consumption gun for limited air supply should consider a different nozzle or feed type.
Highlights
- Pressure feed delivers consistent finish
- 3 cfm at 50 psi air consumption
- 2 mm nozzle for medium-fast application
- 14 in pattern covers wide areas quickly
- Includes 6 ft air and fluid hoses
Specifications
| Brand | BINKS |
|---|---|
| Color | Transparent |
Questions about this item
What air pressure does the 98-1067 gun need to hit its 14.3 cfm consumption figure?
The specification lists 14.3 cfm at 50 psi, so that is the operating pressure the gun is rated for.
What hose fittings are required to connect the included 6 ft air and fluid lines to the gun?
The gun has a 1/4 in air inlet; the supplied 6 ft air hose and 6 ft fluid hose are pre-fitted to match that inlet and the fluid port.
How is the 1.2 mm nozzle installed, and what step do users often miss?
Unscrew the air cap, remove the old nozzle with the correct spanner, fit the 1.2 mm nozzle, then re-torque the air cap — skipping the re-torque causes pattern distortion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
