Binks
Binks 83Z-220 2.8 gal Pressure Tank
Stainless steel pressure tank holds 2.8 gal for pressure feed spray guns, rated to 80 psi with two regulators included
- ColorTransparent
- 8 gal capacity holds more coating for longer spray runs
- Stainless steel construction resists corrosion and simplifies cleaning
- 80 psi maximum pressure delivers consistent atomisation for smooth finishes
- Dual regulators let you balance fluid and air pressure independently
- 1/4 in and 3/8 in NPS connectors fit standard pressure-feed spray guns
2.8 gal Stainless Steel Pressure Tank
The Binks 83Z-220 is a 2.8 gallon stainless steel pressure tank designed for use with pressure feed spray guns. It provides a consistent fluid supply for professional coating applications in automotive and industrial settings. The transparent construction allows operators to monitor material levels at a glance.
Dual Regulators and Standard Connectors
The unit includes two regulators to manage fluid and atomisation air pressure independently up to a maximum of 80 psi. It connects to the air supply via a 1/4 in NPS fitting and to the paint line through a 3/8 in NPS female connector. This arrangement integrates directly into existing spray booth plumbing without proprietary adapters.
Sustained Output for Continuous Spraying
The 2.8 gal capacity supports extended spraying sessions without frequent refilling, maintaining steady pressure throughout the job. Stainless steel construction resists corrosion from solvent-based and water-based coatings alike. The tank is not suited for applications requiring larger reservoirs or pressures exceeding the 80 psi rating.
Highlights
- 8 gal capacity holds more coating for longer spray runs
- Stainless steel construction resists corrosion and simplifies cleaning
- 80 psi maximum pressure delivers consistent atomisation for smooth finishes
- Dual regulators let you balance fluid and air pressure independently
- 1/4 in and 3/8 in NPS connectors fit standard pressure-feed spray guns
Specifications
| Brand | BINKS |
|---|---|
| Color | Transparent |
Questions about this item
How long can the tank run at 80 psi before the regulators need a cool-down?
The tank is rated for a maximum working pressure of 80 psi; sustained operation at that pressure is limited by the two included regulators and the air supply rather than the vessel itself.
What noise or heat should I expect when the agitator runs continuously?
The unit has no built-in agitator or motor, so it produces no mechanical noise or heat; only the compressed-air hiss from the supply line is audible.
Which fittings must my existing air and fluid lines have to connect directly?
You need a 1/4 in NPS air-line fitting and a 3/8 in NPS (female) paint-line fitting to match the tank's connectors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
