Big Horn
Big Horn 19290 9 Inch Woodworking Bench Vise tool storage
Light-duty woodworking bench vise with 9 inch jaw width and 8 inch opening, high tensile iron jaws drilled for wood faces, zinc plated steel screw and handle
- 9 Inch jaw width handles wide workpieces
- 8 Inch jaw opening accommodates thick stock
- 3 Inch throat depth reaches deep into pieces
- High tensile iron jaws resist wear under load
- Zinc plated steel screw and handle fight corrosion
Big Horn 19290 Woodworking Vise
The Big Horn 19290 is a 9-inch jaw width bench vise built for light-duty woodworking tasks. Its high tensile iron jaws and cold rolled steel guide bars provide a stable clamping platform for hobbyists and home workshops. Jaws are pre-drilled to accept wooden faces that protect delicate workpieces. The zinc plated main screw and cross pin handle deliver reliable operation for everyday joinery and assembly work.
Upgrade from smaller clamps
This vise replaces handheld clamps or smaller bench models when a permanent, rigid mounting point is needed. The 8-inch jaw opening and 3-inch depth accommodate wider boards and deeper workpieces that smaller tools cannot hold securely. The jump is worth it when projects demand consistent alignment and two-handed freedom for planing, sawing or chiseling. It is not for heavy metalworking or high-volume production environments.
Sustained clamping behavior
Under continuous load the cold rolled steel guide bars maintain parallel jaw alignment without binding. The zinc plated main screw resists corrosion during long glue-ups or extended drying periods. High tensile iron jaws distribute pressure evenly across the full 9-inch width, reducing localized deformation on the workpiece. The fixed bench mount ensures the assembly does not shift when lateral forces are applied during hand-tool operations.
Highlights
- 9 Inch jaw width handles wide workpieces
- 8 Inch jaw opening accommodates thick stock
- 3 Inch throat depth reaches deep into pieces
- High tensile iron jaws resist wear under load
- Zinc plated steel screw and handle fight corrosion
Specifications
| Brand | BIG HORN |
|---|
Questions about this item
What bench thickness and hole spacing suit the 9 inch jaw width and 8 inch jaw opening of the 19290?
The 19290 clamps to benches thick enough for its mounting bolts; the jaws are drilled for wood faces so you can adapt the mounting pattern to your bench.
Which step is most often missed when fitting the high tensile iron jaws and cold rolled steel guide bars?
Align the guide bars square to the bench before tightening the bolts, then attach wooden jaw faces to protect workpieces from the bare iron.
How often should the zinc plated steel main screw and cross pin handle be lubricated?
Apply light machine oil to the main screw threads and cross pin every few months or when the action feels stiff to keep the mechanism moving smoothly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
