BFKK
BFKK Power Pass Coaxial Splitter 4 Way TV 5-2300MHz Satellite RG6 RG59 Cable
Four-way coaxial splitter passes power and covers 5-2300 MHz for satellite and TV distribution
- TypeRadio Home Kit
- Operate multiple units from a single source
- Epoxy-sealed back cover resists corrosion
- 5-2300 MHz 75 Ohm frequency range
- F-Type coaxial fitting for RG6 and RG59
- Radio Home Kit type for satellite distribution
Four-Way Coaxial Splitter for Satellite TV
This four-way coaxial splitter distributes a single satellite or terrestrial signal to up to four receivers across a 5-2300 MHz bandwidth. It is designed for residential installations using RG6 or RG59 cables with F-type connectors. The 75 Ohm impedance matches standard TV and satellite distribution systems.
Simple F-Type Connections with Epoxy-Sealed Housing
Installation requires only screwing F-type plugs onto each port; no tools or soldering are needed. The epoxy-sealed back cover and anti-corrosion plating protect internal contacts from moisture and oxidation, which are the most common causes of signal loss in outdoor or loft-mounted setups.
Verify Cable Type and Port Count Before Ordering
Confirm that your existing cabling uses F-type connectors and matches RG6 or RG59 specifications. This unit provides exactly four output ports; installations requiring more than four drops will need additional splitters or a different distribution approach.
Highlights
- Operate multiple units from a single source
- Epoxy-sealed back cover resists corrosion
- 5-2300 MHz 75 Ohm frequency range
- F-Type coaxial fitting for RG6 and RG59
- Radio Home Kit type for satellite distribution
Specifications
| Type | Radio Home Kit |
|---|
Questions about this item
How can I confirm the 5-2300 MHz 75Ohm splitter is passing signal correctly after installation?
Connect each output to a TV or satellite receiver and verify clear picture and sound on all four ports; the epoxy-sealed, anti-corrosion housing maintains consistent 75 Ohm impedance across the full 5-2300 MHz range.
What comes in the box with the BFKK 4-way F-type coaxial splitter and what extra items are needed?
The package contains the 4-way power-pass splitter with F-type fittings; you must supply RG6 or RG59 coaxial cables and F-type connectors for each input and output run.
Which version of the BFKK splitter should I choose for a standard 75 Ohm satellite TV distribution system?
Select the single 5-2300 MHz 75Ohm F-type 4-way model listed; it covers the full satellite IF band and passes DC power for LNB operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



