We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical pendant mount for ceiling camera installation

BFKK

BFKK Pendant Mount for UVC-G3-FLEX Network Camera

SKU CH-1TKZ-1JHNT

A pendant mount for the UVC-G3-FLEX camera that attaches to 1.5"-11.5 NPS or 3/4"-14 NPS threaded tubing and routes an Ethernet cable through the conduit

  • Ceiling pendant mount designed for UVC-G3-FLEX camera
  • Fits 1.5"-11.5 NPS and 3/4"-14 NPS threaded tubing
  • Ethernet cable routes through conduit for clean wiring
  • Secures camera with two screws for stable attachment
  • New mounting bracket listed by manufacturer June 22, 2023

BFKK Pendant Mount for UVC-G3-FLEX

This pendant mounting bracket attaches a Ubiquiti UVC-G3-FLEX camera to standard 1.5 "-11.5 NPS or 3/4" -14 NPS threaded tubing. An Ethernet cable routes through the conduit and the camera secures with two screws. It is built for ceiling-hung installations where conduit is already in place.

Installers using standard NPS conduit

The bracket suits installers running 1.5 "-11.5 NPS or 3/4" -14 NPS conduit who need a clean pendant drop for the G3 FLEX. It will not fit cameras lacking the two-screw mounting pattern or conduit with different thread specifications. Builders needing wall or pole mounting should look at a different bracket style.

Verify conduit thread and camera mounting

Confirm your existing conduit uses 1.5 "-11.5 NPS or 3/4" -14 NPS threads before ordering. Check that the camera base accepts the two-screw fastening method shown in the product details. Ensure the conduit inner diameter allows the Ethernet cable to pass through freely.

Highlights

  • Ceiling pendant mount designed for UVC-G3-FLEX camera
  • Fits 1.5"-11.5 NPS and 3/4"-14 NPS threaded tubing
  • Ethernet cable routes through conduit for clean wiring
  • Secures camera with two screws for stable attachment
  • New mounting bracket listed by manufacturer June 22, 2023

Specifications

No published specifications for this item yet.

Questions about this item

What ceiling-thread size must my conduit already have for this pendant mount to fit?

The bracket accepts standard 1.5 "-11.5 NPS or 3/4" -14 NPS threaded tubing.

Will my existing UVC-G3-FLEX camera attach without new holes?

Yes, the G3 FLEX secures to the mount with two screws using its original pattern.

How can I confirm the Ethernet cable is properly routed after installation?

The cable should pass cleanly through the conduit and connect to the camera port without tension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.