We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial media converter with SC fiber connectors in aluminium housing

BFKK

BFKK Industrial 2 Port Gigabit Multi-Mode Fiber Media Converter PoE Hardened SC 550m video accessory

SKU CH-7K98-GV1ZQ

Hardened two-port Gigabit fiber media converter delivers PoE+ over multi-mode SC links up to 550 m and operates from 12–48 V DC in -40 °C to 75 °C environments

  • Supports both 100M and 1G fibre links via auto-sensing SC port
  • Delivers up to 30W PoE+ per port with IEEE 802.3af/at compliance
  • Accepts 12–48V DC input and boosts to 48V PoE output
  • Operates reliably from -40°C to 75°C in hardened aluminium housing
  • Includes 35mm DIN-rail clip and wall-mount hardware for flexible installation

Industrial 2 Port Gigabit Fiber Media Converter

This hardened converter links two 10/100/1000Base-TX PoE ports with an SC multi-mode fiber uplink reaching 550 metres. It targets installers who need to power cameras or wireless points over Ethernet while extending the link across outdoor or industrial sites. The unit accepts 12 V to 48 V DC input and boosts it to standard 48 V PoE output, simplifying solar or centralised low-voltage supplies.

Sustained Load Behaviour

Industrial grade components and an aluminium enclosure keep the converter operating from -40 °C to 75 °C without active cooling. The SC port auto-senses 155 Mbps or 1.25 Gbps fibre modules, so the link remains stable whether the far end runs at 100M or 1000M. PoE delivery follows IEEE 802.3af at 15.4 W and IEEE 802.3at at 30 W per port continuously across the full temperature range.

550 Metre Multi-Mode Reach

The single decisive specification is the 550 metre maximum transmission distance over multi-mode fibre using the SC interface. If the installation requires a longer span or single-mode fibre, this converter will not meet the requirement. For shorter campus or building-to-building runs within that limit, the 550 m figure confirms suitability.

Highlights

  • Supports both 100M and 1G fibre links via auto-sensing SC port
  • Delivers up to 30W PoE+ per port with IEEE 802.3af/at compliance
  • Accepts 12–48V DC input and boosts to 48V PoE output
  • Operates reliably from -40°C to 75°C in hardened aluminium housing
  • Includes 35mm DIN-rail clip and wall-mount hardware for flexible installation

Specifications

No published specifications for this item yet.

Questions about this item

How much heat does the aluminium housing handle when the converter runs continuously at 75 °C?

Industrial-grade components and the aluminium enclosure are rated for continuous operation from -40 °C to 75 °C without active cooling.

What DC voltage must my power supply deliver to activate the PoE+ ports?

The unit accepts 12 V to 48 V DC input and internally boosts it to 48 V for IEEE 802.3at PoE+ output up to 30 W per port.

Will the SC fibre ports link to my existing 100 Mbps multi-mode equipment?

Yes, the auto-sensing SC ports support both 155 Mbps and 1.25 Gbps modules, so 100 M and 1000 M fibre devices connect directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.