We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of metal media converters with SFP modules and power supplies installed

BFKK

BFKK Gigabit SFP to RJ45 Converter Pair 1000Base-LX 1310nm 20km video accessory

SKU CH-H0NR-3Y53S

A pair of gigabit media converters with pre-installed 1310 nm single-mode SFP modules extend Ethernet up to 20 km over LC fiber with plug-and-play setup and LED status indicators

  • Gigabit Ethernet over fibre up to 20 km
  • Pair of converters with pre-installed SFP modules
  • Auto-negotiation for 10/100/1000 Mbps copper links
  • LED indicators show power, fibre and Ethernet status
  • Metal case with cooling holes for versatile mounting

Pair of Gigabit Fiber-to-Ethernet Converters

This set provides two media converters that translate single-mode fibre into copper Ethernet. Each unit includes a pre-installed SFP transceiver and a power supply. The kit suits installers extending a network over long fibre runs in homes, offices or equipment rooms.

Plug-and-Play Installation

Power the units, link them with LC single-mode fibre and patch the RJ45 ports to your devices; no software setup is needed. The only common issue is fibre polarity — TX must connect to RX on the opposite end. LED indicators on power, SFP and RJ45 ports confirm link status instantly.

1310 nm Single-Mode Reach up to 20 km

The built-in 1.25 Gbps SFP modules operate at 1310 nm over standard LC single-mode fibre, supporting spans up to 20 km. The copper side negotiates at 10, 100 or 1000 Mbps over Cat5e or Cat6 cable for 100 m. Verify your fibre type and distance before purchasing.

Highlights

  • Gigabit Ethernet over fibre up to 20 km
  • Pair of converters with pre-installed SFP modules
  • Auto-negotiation for 10/100/1000 Mbps copper links
  • LED indicators show power, fibre and Ethernet status
  • Metal case with cooling holes for versatile mounting

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the media converters are linked and passing traffic after I connect them?

Each unit has Power, SFP and RJ45 LEDs; when all three are lit the fibre link at 1310 nm and the copper link up to 100 m are both active.

What ships in the pair and is anything else required to get started?

The box contains two gigabit media converters with 1000Base-LX SFP modules pre-installed, two AC/DC power supplies and a user manual; only single-mode LC patch cables are needed to complete the link.

Which capacity should I select for a 20 km single-mode deployment?

The supplied 1000Base-LX modules operate at 1310 nm and are rated for up to 20 km on single-mode fibre, matching the stated distance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.